Modelling and performance of three‐phase 6/14 pole flux reversal machine
Authors:
Open Access
- 1 February 2013
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 7 (2) , 131-139
Abstract
A three‐phase flux reversal machine (FRM) is modelled using the d – q theory. A fictitious ‘electrical gear’ concept is used to simplify modelling and analysis of this machine. The d – q equivalent circuits are proposed based on this gear ratio. A power density of the machine is improved with full pitch winding. The torque obtained with full pitch winding is twice that of concentrated stator pole winding for same input current. FRM with full pitch winding (FPFRM) is compared with the conventional concentrated stator pole winding FRM (CSPFRM). The results obtained using the proposed d – q circuits are compared with those obtained from FEM analysis. A steady‐state performance of FPFRM and CSPFRM is evaluated with proposed d – q circuits. To validate the modelling based on d – q equivalent circuits, a 6/14 pole FRM is fabricated with the conventional concentrated stator pole winding and full pitch winding for wind power application. The analytical results are compared with finite element method (FEM) analysis results and experimental results.Keywords
This publication has 16 references indexed in Scilit:
- Analysis of Flux-Reversal Machine Based on Fictitious Electrical GearIEEE Transactions on Energy Conversion, 2010
- Power density improvement of three phase flux reversal machine with distributed windingIET Electric Power Applications, 2010
- Reduction of the Torque Ripple and Magnetic Force of a Rotatory Two-Phase Transverse Flux Machine Using Herringbone TeethIEEE Transactions on Magnetics, 2008
- Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet MotorIEEE Transactions on Energy Conversion, 2008
- New Approach to Power Equation for Comparison of Doubly Salient Electrical Machines2006
- Reduction of cogging torque in flux-reversal machine by rotor teeth pairingIEEE Transactions on Magnetics, 2005
- A Study of the Design for the Flux Reversal MachineIEEE Transactions on Magnetics, 2004
- Theoretical characterization of flux reversal machine in low-speed servo drives-the pole-PM configurationIEEE Transactions on Industry Applications, 2002
- Three-phase flux reversal machine (FRM)IEE Proceedings - Electric Power Applications, 1999
- The flux-reversal machine: a new brushless doubly-salient permanent-magnet machineIEEE Transactions on Industry Applications, 1997