Influence of Ga Content on the Microstructure and Mechanical Properties of Cadmium-Free Filler Metal
Open Access
Abstract
The influence of Ga content on the melting temperature, wettability, microstructure, and mechanical properties of low-silver 12AgCuZnSn-2In-0.15Pr cadmium-free filler metal was investigated systematically by means of differential thermal analysis, X-ray diffractometer, scanning electron microscopy, energy-dispersive spectrometer, etc. The results showed that the addition of the Ga element reduced the solidus and liquidus temperatures of the novel low-silver filler metals, and effectively increased the spreading area of the filler metal on the copper and 304 stainless steel substrates. Furthermore, an appropriate amount of Ga element significantly optimized the interface morphology and improved the mechanical properties of the brazed joints. When the Ga content was 1wt.%, the shear strength of the brazed joints reached a peak value of 448 MPa, and the corresponding fracture morphology showed typical ductile characteristics with obvious dimples.Keywords
Funding Information
- National Natural Science Foundation of China (51975284)
- Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD) (51975284)
This publication has 22 references indexed in Scilit:
- Effect of Ce Addition on the Microstructure and Properties of Ag17CuZnSn Filler MetalJournal of Materials Engineering and Performance, 2017
- Fiber laser welding of austenitic steel and commercially pure copper butt jointOptics and Lasers in Engineering, 2017
- Study on the microstructure and properties of low-Ag Sn–0.3Ag–0.7Cu–0.5Ga solder alloys bearing PrJournal of Materials Science: Materials in Electronics, 2017
- Study on novel Ag-Cu-Zn-Sn brazing filler metal bearing GaJournal of Alloys and Compounds, 2016
- Effect of Ag on the properties of solders and brazing filler metalsJournal of Materials Science: Materials in Electronics, 2015
- Wetting and spreading behavior of molten brazing filler metallic alloys on metallic substrateIOP Conference Series: Materials Science and Engineering, 2014
- Effects of Ti on the Brazability of Zn-22Al-xTi Filler Metals as Well as Properties of Cu/Al Brazing JointsRare Metal Materials and Engineering, 2013
- Effect of Silver Content on Microstructure and Properties of Brass/steel Induction Brazing Joint Using Ag-Cu-Zn-Sn Filler MetalJournal of Materials Science & Technology, 2011
- How are WEEE doing? A global review of the management of electrical and electronic wastesWaste Management, 2011
- WEEE flow and mitigating measures in ChinaWaste Management, 2008