Dual‐grained (Ti, W)C–Ni cermets by two‐step carbonization: Hot isotropic press sintering of NiTiW alloys and colloidal graphite
- 15 December 2018
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 102 (7) , 4296-4305
Abstract
Reactive sintering of crushed metals and carbon is advantageous for preparing toughened complete solid‐solution cermets (CSCs). Here, dual‐grained (Ti 0.6 , W 0.4 )C–18Ni cermets were prepared using a two‐step carbonization method. High‐energy milling of Ni–Ti–W–C (Ni(Ti 0.6 , W 0.4 ) 4 C) mixture afforded NiTiW solid solution, which was then transformed into Ni 6 W 6 C by heating at 1250°C. Twinned (Ti, W)C platelets were formed by the carbonization of Ni 2 W 4 C during liquid sintering. W atoms that accumulated in the (111) planes of TiC promoted the {111} twin formation, leading to sandwich‐type (Ti, W)C platelets. Dense (Ti 0.6 , W 0.4 )C–18Ni cermets were obtained by hot isostatic press sintering in Ar with satisfactory Hv of 12.8 ± 0.2 GPa, high strength of 1960 ± 84 MPa and toughness of 15.80 ± 0.6 MPa·m 1/2 . A higher sintering temperature or graphite content accelerated the carbonization, resulting in coarser platelets with decreased aspect ratio. This study provides a new approach to modify the microstructure of CSCs and a method for preparing dual‐grained cermets.Keywords
Funding Information
- National Natural Science Foundation of China (51704335)
This publication has 29 references indexed in Scilit:
- Microstructure and mechanical properties of (Ti,W)C–Ni cermet prepared using a nano-sized TiC–WC powder mixtureJournal of Alloys and Compounds, 2015
- Development and application of tool wear: A review of the characterization of TiC-based cermets with different bindersChemical Engineering Journal, 2014
- Characterization of Ti-based solid solution cermets prepared by mechanically induced self-sustained reaction and subsequent pressureless sinteringJournal of Alloys and Compounds, 2014
- Development of TiCN-based cermets: Mechanical properties and wear mechanismInternational Journal of Refractory Metals and Hard Materials, 2013
- Effect of submicron Ti(C,N) on the microstructure and the mechanical properties of Ti(C,N)-based cermetsInternational Journal of Refractory Metals and Hard Materials, 2011
- Properties of Ti(C,N) cermets synthesized by mechanically induced self-sustaining reactionJournal of the European Ceramic Society, 2009
- The effect of WC, Mo2C, TaC content on the microstructure and properties of ultra-fine TiC0.7N0.3 cermetMaterials & Design (1980-2015), 2007
- Toughened ultra-fine (Ti,W)(CN)–Ni cermetsScripta Materialia, 2005
- Effect of ultra-fine powders on the microstructure of Ti(CN)–xWC–Ni cermetsActa Materialia, 2004
- Rim Structure in Ti(C 0.7 N 0.3 )–WC–Ni CermetsJournal of the American Ceramic Society, 2003