Effect of Copper Addition on Corrosion Behavior of High-Performance Austenitic Stainless Steel in Highly Concentrated Sulfuric Acid Solution—Part 1
Authors:
- 1 February 2007
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 63 (2) , 114-126
Abstract
The effects of Cu addition on the corrosion behavior of austenitic stainless steel in 18.4 N sulfuric acid (H2SO4) at 80°C to 120°C was investigated through anodic polarization, cathodic polarization, long-term immersion, x-ray photoelectron spectroscopy (XPS) analysis, and scanning Auger microscopy (SAM). The addition of 3.2% Cu in the alloy enhanced the corrosion resistance greatly in highly concentrated H2SO4 by decreasing corrosion current density, current density of hydrogen evolution, critical current density, and passivation current density. The dissolution rates of each of the elements in the alloy resembled that of the elements in pure metal form. The protective surface film was heavily enriched with the noble metallic Cu and cupric oxide (CuO) from the selective dissolution of the active metallic Fe, Ni, and Cr. In addition, the corrosion resistance seemed to be associated with nickel oxide (NiO), molybdenum dioxide (MoO2), tungsten trioxide (WO3), molybdenum oxy-hydroxide (MoO[OH]2), molybdate (MoO42−), tungstate (WO42−), and chromate (CrO42−) contained in the protective surface film. The stainless steel with 18%Cr-21%Ni-3.2%Mo-1.6%W-0.2%N-3.2%Cu-0.035%C displayed a noticeably better corrosion resistance than the commercial super austenitic stainless steels such as UNS S32654 and at least as good as the Ni-based alloys such as CW12MW in a sulfate (SO42−) environment.Keywords
This publication has 9 references indexed in Scilit:
- Effects of Alloying Additions on Corrosion and Passivation Behaviors of Type 304 Stainless SteelCorrosion, 1995
- The surface composition of sintered stainless steel containing noble alloying elements exposed to a H2SO4 environmentCorrosion Science, 1991
- Effect of copper on the strength of AISI 316 stainless steelMetallurgical Transactions A, 1989
- The dissolution behaviour of iron, chromium, molybdenum and copper from pure metals and from ferritic stainless steelsCorrosion Science, 1987
- A Bipolar Model of the Passivity of Stainless Steel: The Role of Mo AdditionJournal of the Electrochemical Society, 1986
- On the Role of Cr in the Passivity of Stainless SteelJournal of the Electrochemical Society, 1986
- On the Mechanism for Improved Passivation by Additions of Tungsten to Austenitic Stainless SteelsCorrosion, 1983
- Microstructural origin of the skeletal ferrite morphology of austenitic stainless steel weldsMetallurgical Transactions A, 1983
- Corrosion and Electrochemical Behavior of Chromium-Noble Metal AlloysJournal of the Electrochemical Society, 1961