Application of a Novel Green Nano Polymer for Chemical EOR Purposes in Sandstone Reservoirs: Synergetic Effects of Different Fluid/Fluid and Rock/Fluid Interacting Mechanisms
Open Access
- 13 November 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (46) , 43930-43954
Abstract
In this research, a novel natural-based polymer, the Aloe Vera biopolymer, is used to improve the mobility of the injected water. Unlike most synthetic chemical polymers used for chemical-enhanced oil recovery, the Aloe Vera biopolymer is environmentally friendly, thermally stable in reservoir conditions, and compatible with reservoir rock and fluids. In addition, the efficiency of the Aloe Vera biopolymer was investigated in the presence of a new synthetic nanocomposite composed of KCl-SiO2-xanthan. This chemically enhanced oil recovery method was applied on a sandstone reservoir in Southwest Iran with crude oil with an API gravity of 22°. The Aloe Vera biopolymer's physicochemical characteristics were initially examined using different analytical instruments. The results showed that the Aloe Vera biopolymer is thermally stable under reservoir conditions. In addition, no precipitation occurred with the formation brine at the salinity of 80,000 ppm. The experimental results showed that adding ethanol with a 10% volume percentage reduced interfacial tension to 15.3 mN/m and contact angle to 108°, which was 52.33 and 55.56% of these values, respectively. On the other hand, adding nanocomposite lowered interfacial tension and contact angle values to 4 mN/m and 48°, corresponding to reducing these values by 87.53 and 71.42%, respectively. The rheology results showed that the solutions prepared by Aloe Vera biopolymer, ethanol, and nanocomposite were Newtonian and fitted to the Herschel-Bulkley model. Finally, core flooding results showed that the application of a solution prepared by Aloe Vera biopolymer, ethanol, and nanocomposite was effective in increasing the oil recovery factor, where the maximum oil recovery factor of 73.35% was achieved, which could be attributed to the IFT reduction, wettability alteration, and mobility improvement mechanisms.Keywords
Funding Information
- Northeast Petroleum University (2023GPL-05)
- Heilongjiang Province (GA23A906)
This publication has 80 references indexed in Scilit:
- Effect of nano titanium dioxide on heavy oil recovery during polymer floodingPetroleum Science and Technology, 2016
- Effects of titanium dioxide nanoparticles on the efficiency of surfactant flooding of heavy oil in a glass micromodelPetroleum Science and Technology, 2016
- Spray drying-microencapsulation of cinnamon infusions (Cinnamomum zeylanicum) with maltodextrinLWT, 2015
- Viability of Biopolymers for Enhanced Oil RecoveryJournal of Dispersion Science and Technology, 2015
- Surface tension and UV–visible investigations of aggregation and adsorption behavior of NaC and NaDC in water–amino acid mixturesFluid Phase Equilibria, 2015
- A laboratory and simulation study of preformed particle gels for water conformance controlFuel, 2015
- Impact of Metal Oxide Nanoparticles on Enhanced Oil Recovery from Limestone Media at Several TemperaturesEnergy & Fuels, 2014
- Enhanced Heavy Oil Recovery in Sandstone Cores Using TiO2 NanofluidsEnergy & Fuels, 2013
- Polymer blends and composites from renewable resourcesProgress in Polymer Science, 2006
- Contact angle measurement on rough surfacesJournal of Colloid and Interface Science, 2004