Investigation on the cavitation bubble dynamics and pressure characteristics near a wall with a viscous oil layer
Open Access
- 30 June 2025
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1014, A9
Abstract
Cavitation bubble pulsation and liquid jet loads are the main causes of hydraulic machinery erosion. Methods to weaken the load influences have always been hot topics of related research. In this work, a method of attaching a viscous layer to a rigid wall is investigated in order to reduce cavitation pulsations and liquid jet loads, using both numerical simulations and experiments. A multiphase flow model incorporating viscous effects has been developed using the Eulerian finite element method (EFEM), and experimental methods of a laser-induced bubble near the viscous layer attached on a rigid wall have been carefully designed. The effects of the initial bubble–wall distance, the thickness of the viscous layer, and the viscosity on bubble pulsation, migration and wall pressure load are investigated. The results show that the bubble migration distance, the normalised thickness of the oil layer and the wall load generally decrease with the initial bubble–wall distance or the oil-layer parameters. Quantitative analysis reveals that when the initial bubble–wall distance remains unchanged, there exists a demarcation line for the comparison of the bubble period and the reference period (the bubble period without viscous layer under the same initial bubble–wall distance), and a logarithmic relationship is observed that $\delta \propto \log_{10} \mu ^*$ , where $\delta =h/R_{max}$ is the thickness of the viscous layer h normalised by the maximum bubble radius $R_{max}$ , $\mu ^* = \mu /({R_{max }}\sqrt {{\rho }{{\mathop {P}\nolimits } _{{atm}}}})$ is the dynamic viscosity $\mu$ normalised by water density $ \rho $ and atmospheric pressure $P_{atm}$ . The results of this paper can provide technical support for related studies of hydraulic cavitation erosion.
Keywords
Funding Information
- National Natural Science Foundation of China (12332014 and 51925904)
This publication has 49 references indexed in Scilit:
- Research on ice-breaking characteristics of underwater explosion bubbles based on an effective coupled modelApplied Ocean Research, 2024
- Numerical simulation of wall shear stress and boundary layer flow from jetting cavitation bubble on unheated and heated surfacesInternational Journal of Heat and Mass Transfer, 2024
- Jet development and impact load of underwater explosion bubble on solid wallApplied Ocean Research, 2020
- Analysis of breaking and re-closure of a bubble near a free surface based on the Eulerian finite element methodComputers & Fluids, 2018
- Toroidal bubble dynamics near a solid wall at different Reynolds numberInternational Journal of Multiphase Flow, 2018
- Momentum advection on unstructured staggered quadrilateral meshesInternational Journal for Numerical Methods in Engineering, 2008
- On Riemann solvers for compressible liquidsInternational Journal for Numerical Methods in Fluids, 1998
- Computational methods in Lagrangian and Eulerian hydrocodesComputer Methods in Applied Mechanics and Engineering, 1992
- A continuum method for modeling surface tensionJournal of Computational Physics, 1992
- Volume of fluid (VOF) method for the dynamics of free boundariesJournal of Computational Physics, 1981