Abstract
Lightweight sandwich composites are widely used in aerospace, automotive, and defense industries due to their excellent strength-to-weight and energy absorption characteristics. This study explores the influence of different face sheet materials, carbon fiber reinforced polymer (CFRP) and Aramid fiber on the mechanical behavior of the sandwich panels. The sandwich structure is made-up of with Aluminum 3003 Honeycomb as a core, reinforced with polyurethane (PU) foam to improve the structural stability and energy absorption capability. The main focus of the study is to determine the choice of face sheet material affects the performance of mechanical strength, impact resistance and energy dissipation under the loading conditions. The study is mainly focuses on experimental analysis and the experimental findings were validates with the numerical model created using Finite Element Analysis (FEA) in the deformational behavior. The face sheets were fabricated by vacuum assisted resin infusion; the specimens were prepared as per the ASTM standards and mechanical testing under the quasi-static tensile, quasi-static compression, flexural and Izod impact test. The experimental results revealed that the PU foam-filled aramid fiber sandwich composite exhibited the best overall mechanical performance, showing improvements of 82.41% in tensile strength, 46.6% in compressive strength, 77% in flexural strength, and 112% in impact energy absorption compared with the conventional carbon fiber sandwich composite. Although CFRP possesses a higher elastic modulus and inherent stiffness at the constituent material level, the aramid fiber face sheet provided superior structural performance under the present sandwich configuration owing to its higher toughness, improved energy absorption capability, and more efficient load redistribution through the PU foam-filled honeycomb core. It exhibit brittle failures mode under the impact loading conditions, which makes them suitable for load-bearing and stiffness-critical applications. On the other side, Aramid fiber based face sheet panels exhibits better impact resistance and energy absorbing characteristics, which gives high toughness and ductility and reduced stiffness value when compared with CFRP panels. In addition, PU foam inserted in the gap of core, as a filler material provides the stability to the core, enhances the energy dissipation, reduce the localized deformation in both structures. The result findings shows the comparative study of CFRP and Aramid fiber reinforced sandwich panels gives assistance in the material selection application where stiffness, toughness and weight are as dominant parameters.

This publication has 35 references indexed in Scilit: