Development of a Criterion for a Robust Identification of Diffuser Rotating Stall Onset in Industrial Centrifugal Compressors
- 19 September 2018
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (2)
Abstract
Recent studies showed that a prompt detection of the stall inception, connected with a specific model to predict its associated aerodynamic force, could provide room for an extension of the left margin of the operating curve of high-pressure centrifugal compressors. In industrial machines working in the field, however, robust procedures to detect and identify the phenomenon are still missing, i.e., the operating curve is almost ever cut preliminarily by the manufacturer by a proper safety margin; moreover, no agreement is found in the literature about a well-defined threshold to define the onset of the stall. In particular, in some cases, the intensity of the arising subsynchronous frequency is compared to the revolution frequency, while in many other ones it is compared to the blade passage frequency. A large experience in experimental stall analyses collected by the authors revealed that in some cases unexpected spikes could make this direct comparison not reliable for a robust automatic detection. To this end, a new criterion was developed based on an integral analysis of the area subtended to the entire subsynchronous spectrum of the dynamic pressure signal of probes positioned just outside the impeller exit. A dimensionless parameter was then defined to account for the spectrum area increase in proximity to stall inception. This new parameter enabled the definition of a reference threshold to highlight the arising of stall conditions, whose validity and increased robustness was here verified based on a set of experimental analyses of different types of full-stage test cases of industrial centrifugal compressors at the test rig.Keywords
This publication has 27 references indexed in Scilit:
- Investigation of turbocharger compressor surge inception by means of an acoustic two-port modelJournal of Sound and Vibration, 2018
- Surge Vibration-Induced Nonlinear Behavior Regulation of Power Amplifier for Magnetic Bearing in a 315 kW Centrifugal CompressorJournal of Vibration and Acoustics, 2017
- Self-Excited Blade Vibration Experimentally Investigated in Transonic Compressors: Acoustic ResonanceJournal of Turbomachinery, 2015
- Analysis of the Rotordynamic Response of a Centrifugal Compressor Subject to Aerodynamic Loads Due to Rotating StallJournal of Turbomachinery, 2014
- A Systematic Approach to Estimate the Impact of the Aerodynamic Force Induced by Rotating Stall in a Vaneless Diffuser on the Rotordynamic Behavior of Centrifugal CompressorsJournal of Engineering for Gas Turbines and Power, 2013
- Features of performing stall tests and adjusting antistall systems for protecting centrifugal compressors with electromagnetic bearingsChemical and Petroleum Engineering, 2007
- Turbocharger Unstable Operation Diagnosis Using Vibroacoustic MeasurementsJournal of Engineering for Gas Turbines and Power, 2004
- Rotating Stall in Centrifugal Compressor Vaneless Diffuser: Experimental Analysis of Geometrical Parameters Influence on Phenomenon EvolutionInternational Journal of Rotating Machinery, 2000
- Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part 1—Vaneless DiffuserJournal of Turbomachinery, 1995
- Asymmetric Flow in Vaneless Diffusers of Centrifugal BlowersJournal of Fluids Engineering, 1977