Hot-Deformation Behavior and Microstructure Evolution of the Dual-Scale SiCp/A356 Composites Based on Optimal Hot-Processing Parameters
Open Access
Abstract
Hot deformation at elevated temperature is essential to densify particle-reinforced aluminum matrix composites (AMCs) and improve their performance. However, hot deformation behavior of the AMCs is sensitive to the variation of hot-processing parameters. In this paper, optimal processing parameters of dual-scale SiCp/A356 composites were determined to explore the control strategy of the microstructure. Hot-compression tests were conducted at temperatures ranging from 460 to 520 °C under strain rates from 0.01 to 5 s−1. Constitutive equation and processing maps were presented to determine the hot-processing parameters. Microstructure evolution of the dual-scale SiCp/A356 composites was analyzed. The strain rate of 0.62–5 s−1 and deformation temperature of 495–518 °C is suitable for the hot processing. The number of dynamic recrystallization (DRX) grains in the “safe” domains is larger and the dislocation density is lower compared to those of instability domains. DRX grains mainly occurred around SiC particles. The presence of SiC particles can promote effectively the DRX nucleation, which results in the dynamic softening mechanism of the dual-scale SiCp/A356 composites being dominated by DRX.Keywords
This publication has 33 references indexed in Scilit:
- Toughness under different rolling processes in ultra purified Fe–17wt% Cr alloy steelsJournal of Alloys and Compounds, 2013
- Dynamic recrystallization behavior of a medium carbon vanadium microalloyed steelMaterials Science and Engineering: A, 2013
- Compressive deformation behaviour of Al alloy (2014)–10wt.% SiCp composite: Effects of strain rates and temperaturesMaterials Science and Engineering: A, 2011
- Hot deformation behavior of a medium carbon microalloyed steelMaterials Science and Engineering: A, 2011
- Hot deformation behavior of 2026 aluminum alloy during compression at elevated temperatureMaterials Science and Engineering: A, 2010
- Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recoveryMaterials Characterization, 2008
- Threshold stress and load partitioning during creep of metal matrix compositesActa Materialia, 2008
- Hot deformation and processing maps of a particulate reinforced 2618/Al2O3/20p metal matrix compositeComposites Science and Technology, 2004
- Microstructure and thermal conduction properties of an Al-12Si matrix composite reinforced with dual sized SiC particlesJournal of Materials Science, 2004
- Hot WorkabilityInternational Materials Reviews, 1972