Preliminary views on the potential of foamed concrete as a structural material
Authors:
- M. R. JonesMJM. R. Jones
- A. McCarthyAMA. McCarthy
- 1 February 2005
- journal article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 57 (1) , 21-31
Abstract
Low self-weight (800 to 1600 kg/m3), high workability (flowing and self-compacting) and excellent thermal insulating properties (< 0·50 W/mK) make foamed concrete attractive for many construction applications. Indeed, it is now a well-established material in void filling and highway reinstatement uses. However, its wider use in structural applications has been inhibited by its technical and engineering unfamiliarity and a perceived difficulty of achieving sufficiently high strength (say > 25 N/mm2). This paper describes a laboratory study of the development of foamed concrete, utilising two types of fly ash, with the potential for use in structural applications. ‘Fine’ fly ash (i.e. to BS EN 450) was used to partially replace Portland cement and a ‘coarse’ fly ash (i.e. to BS 3892-2) to replace sand fine aggregate. In addition, the potential of polypropylene fibres in foamed concrete to enhance plasticity and tensile strength was examined. The key early age, engineering and durability properties were meas...Keywords
This publication has 2 references indexed in Scilit:
- Factors influencing the density and compressive strength of aerated concreteMagazine of Concrete Research, 2000
- The Influence of the Mix Design on the Properties of Micro-Cellular Concrete1999