Neutron diffraction study of mechanically alloyed and in situ annealed Al75Mo25 powders
- 25 February 2000
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 87 (6) , 2753-2759
Abstract
The mechanical treatment of a mixture of pure elemental powders in a high-energy mixer mill induces partial solid state reactivity and solid solution formation. This is suggested by a quantitative phase evaluation and by the changes of Al lattice parameter carried out with Rietveld analysis of diffraction patterns collected after extended time of processing (4, 8, 16, 32, 57, and 78 h). The small angle neutron scattering experiments showed that diffusion processes are the rate-controlling step for these solid state reactions. The formation of metastable phases is confirmed by in situ neutron diffraction annealing experiments on selected as-milled powders. In the specimen mechanically alloyed for 4 h, phase is formed at 590 °C (below the aluminum melting point). Soon after this temperature, the remaining Al is consumed to form the phase. In the alloy mechanically treated for 32 h, the phase appears after annealing at 430 °C, while the phase is found at 493 °C. After the disappearance of phase (500 °C), the solid state reaction proceeds to form a new tetragonal phase, not reported in the equilibrium phase diagram. In the specimen mechanically treated for 57 h, the total formation of is recorded at 430 °C. Conversely, in the powder ball milled for 78 h, the phase appears at 390 °C and coexists with tetragonal
Keywords
This publication has 30 references indexed in Scilit:
- Synthesis of nanostructured materials by mechanical milling: problems and opportunitiesNanostructured Materials, 1997
- X-ray powder diffraction and Mössbauer study of nanocrystalline Fe Al prepared by mechanical alloyingActa Materialia, 1996
- Structural and elastic behavior of Fe50Al50 nanocrystalline alloysJournal of Applied Physics, 1996
- Approach to nanostructured solids through the studies of submicron grained polycrystalsNanostructured Materials, 1995
- Formation of Nanostructural Materials Induced by Mechanical Processings (Overview)Materials Transactions, JIM, 1995
- Nanocrystalline materialsInternational Materials Reviews, 1995
- Mechanical alloying in the FeAl systemMaterials Science and Engineering: A, 1994
- Structural evolution of mechanical alloyed Fe-Al powders after consolidation and thermal ageingJournal of Applied Physics, 1993
- Structural changes during mechanical alloying of elemental aluminium and molybdenum powdersJournal of Materials Science, 1991
- Structure and phase composition of Fe3Al alloy powder prepared by millingMaterials Science and Engineering: A, 1991