Repelling Polysulfides Using White Graphite Introduced Polymer Membrane as a Shielding Layer in Ambient Temperature Sodium Sulfur Battery
- 30 October 2019
- journal article
- research article
- Published by Wiley in Advanced Materials Interfaces
- Vol. 6 (24)
Abstract
Herein, a strategy is demonstrated to effectively control the sodium polysulfide dissolution using composite polymer blend membrane. The sufficient interconnected pores in the white graphite introduced polymer blend membrane plays a multifunctional role as an ion selective membrane, evident from the ionic conductivity of 10−3 S cm−1 facilitating the movement of sodium ions and the presence of boron and nitrogen in white graphite acts as an effective absorbent to trap sodium polysulfides. The electrochemical testing reveals significant improvement of about 87.6% in specific capacity when compared to the cell without white graphite@ polymer membrane. Also, the cell exhibits an excellent cycling stability with a capacity retention of 83.1% at the end of 500 cycles. Other than the performance enhancement, the self‐discharge battery is significantly reduced using the developed membrane. The better performance of the room temperature sodium sulfur battery is attributed to the physical and chemical confinement of composite polymer membrane which is also evident from the post analysis study. This is the first attempt of utilizing composite polymer membrane as a blocking layer in room temperature sodium sulfur batteries and is promising for the construction of high performance batteries.Keywords
Funding Information
- Indian Institute of Technology Madras
- Ministry of Human Resource Development
- Department of Science and Technology, Government of Kerala
This publication has 44 references indexed in Scilit:
- Dual phase polymer gel electrolyte based on non-woven poly(vinylidenefluoride-co-hexafluoropropylene)–layered clay nanocomposite fibrous membranes for lithium ion batteriesMaterials Research Bulletin, 2013
- Electrochemical Impedance Spectroscopy Study of a Lithium/Sulfur Battery: Modeling and Analysis of Capacity FadingJournal of the Electrochemical Society, 2013
- Composite of a nonwoven fabric with poly(vinylidene fluoride) as a gel membrane of high safety for lithium ion batteryEnergy & Environmental Science, 2012
- Smaller Sulfur Molecules Promise Better Lithium–Sulfur BatteriesJournal of the American Chemical Society, 2012
- Discharge reaction mechanism of room-temperature sodium–sulfur battery with tetra ethylene glycol dimethyl ether liquid electrolyteJournal of Power Sources, 2011
- Is lithium the new gold?Nature Chemistry, 2010
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Ionic conductivity and electrochemical properties of nanocomposite polymer electrolytes based on electrospun poly(vinylidene fluoride-co-hexafluoropropylene) with nano-sized ceramic fillersElectrochimica Acta, 2008
- Novel electrospun poly(vinylidene fluoride-co-hexafluoropropylene)–in situ SiO2 composite membrane-based polymer electrolyte for lithium batteriesJournal of Power Sources, 2008
- Room temperature Na/S batteries with sulfur composite cathode materialsElectrochemistry Communications, 2007