Additive manufacturing in prosthesis development – a case study
Authors:
- Palash Kumar MajiPMPalash Kumar Maji
- Amit Jyoti BanerjeeABAmit Jyoti Banerjee
- Partha Sarathi BanerjeePBPartha Sarathi Banerjee
- Sankar KarmakarSKSankar Karmakar
- 20 October 2014
- journal article
- Published by Emerald Publishing in Rapid Prototyping Journal
- Vol. 20 (6) , 480-489
Abstract
Purpose: – The purpose of this paper was development of patient-specific femoral prosthesis using rapid prototyping (RP), a part of additive manufacturing (AM) technology, and comparison of its merits or demerits over CNC machining route. Design/methodology/approach: – The customized femoral prosthesis was developed through computed tomography (CT)-3D CAD-RP-rapid tooling (RT)-investment casting (IC) route using a stereolithography apparatus (SLA-250) RP machine. A similar prosthesis was also developed through conventional CT-CAD-CAM-CNC, using RP models to check the fit before machining. The dimensional accuracy, surface finish, cost and time involvement were compared between these two routes. Findings: – In both the routes, RP had an important role in checking the fit. Through the conventional machining route, higher-dimensional accuracies and surface finish were achieved. On the contrary, RP route involved lesser time and cost, with rougher surface finish on the prosthesis surface and less internal shrinkage porosity. The rougher surface finish of the prosthesis is favourable for bone ingrowths after implantation and porosity reduce the effective stiffness of the prosthesis, leading to reduced stress shielding effect after implantation. Research limitations/implications: – As there is no AM machine for direct fabrication of metallic component like laser engineered net shaping and electron beam melting in our Institute, the metallic prosthesis was developed through RP-RT-IC route using the SLA-250 machine. Practical implications: – The patient-specific prosthesis always provides better fit and favourable stress distribution, leading to longer life of the prosthesis. The described RP route can be followed to develop the customized prosthesis at lower price within the shortest time. Originality/value: – The described methodology of customized prosthesis development through the AM route and its advantages are applicable for development of any metallic prostheses.Keywords
This publication has 14 references indexed in Scilit:
- Short stems for total hip arthroplastyThe Journal of Bone and Joint Surgery. British volume, 2012
- Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam MeltingInternational Journal of Biomaterials, 2012
- Custom Cementless Stem Improves Hip Function in Young Patients at 15-year FollowupClinical Orthopaedics and Related Research, 2010
- Prediction of Femur Bone Geometry using Anthropometric Data of Indian Population: A Numerical ApproachJournal of Medical Sciences, 2009
- Application of Laser Engineered Net Shaping (LENS) to manufacture porous and functionally graded structures for load bearing implantsJournal of Materials Science: Materials in Medicine, 2008
- Engineered porous metals for implantsJOM, 2008
- Application of rapid prototyping and rapid tooling for development of patient-specific craniofacial implant: an investigative studyThe International Journal of Advanced Manufacturing Technology, 2007
- The Effect of Surface Finish and of Vertical Ribs on the Stability of a Cemented Femoral Stem: An In Vitro Stair Climbing TestThe Journal of Arthroplasty, 2006
- Rapid planning for CNC milling—A new approach for rapid prototypingJournal of Manufacturing Systems, 2004
- EFFECTS OF FEMORAL NECK LENGTH, STEM SIZE, AND BODY WEIGHT ON STRAINS IN THE PROXIMAL CEMENT MANTLEJournal of Bone and Joint Surgery, 2002