Tribological behavior of LD-4 phosphate hydraulic oil for aviation servo valve applications: 3J1/G95Cr18 tribo-pair
- 1 September 2026
- journal article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 78 (10) , 1689-1699
Abstract
Purpose: This study aims to investigate the frictional behavior and mechanisms of the 3J1/G95Cr18 friction pair in LD-4 phosphate hydraulic oil. With advancing aviation industry requirements, the lubrication performance of third-generation phosphate ester hydraulic oil in advanced material friction pairs needs comprehensive evaluation. Design/methodology/approach: Friction and wear characteristics of austenitic high elastic alloy (3J1) and high carbon martensitic stainless steel (G95Cr18) lubricated with LD-4 phosphate hydraulic oil were investigated under different sliding speeds, loads and temperatures. Findings: LD-4 phosphate hydraulic oil exhibits excellent tribological properties with the 3J1/G95Cr18 friction pair. As sliding speed increases, the coefficient of friction (COF) first decreases then increases, reaching optimal value of 0.143 at 75 mm/s. With increasing load, COF gradually increases from 0.133 to 0.153. Temperature effects show COF initially increases, then decreases and stabilizes, with low wear rates at moderate temperatures. The system maintains mixed lubrication under all conditions, with abrasive wear accompanied by adhesive wear. Originality/value: This study systematically examined the 3J1/G95Cr18 friction pair in LD-4 phosphate hydraulic oil for the first time, providing valuable guidance for aviation electro-hydraulic servo valve applications.Keywords
This publication has 26 references indexed in Scilit:
- Graphite-Enhanced PTFE/PEEK composite coating for improved friction and wear resistanceApplied Surface Science, 2025
- Leakage mechanism analysis of electsro-hydraulic servo valve under transverse vibration environmentEngineering Failure Analysis, 2024
- Root Cause Analysis of Failed AISI 440C High Carbon Stainless Steel Used in Aerospace Actuator SystemsJournal of Failure Analysis and Prevention, 2024
- Ionic liquids as lubricants: An overview of recent developmentsJournal of Molecular Structure, 2023
- Analysis of Coarse Crystal Defect During Rolling of 3J1A Alloy2023
- Nano and micro additivated glycerol as a promising alternative to existing non-biodegradable and skin unfriendly synthetic cutting fluidsJournal of Cleaner Production, 2020
- Investigation of the tribological performance of ionic liquids in non-conformal EHL contacts under electric field activationFriction, 2020
- Tribological Behavior of Ferrous-Based APS Coatings Under Dry Sliding ConditionsJournal of Thermal Spray Technology, 2014
- High precise control method for a new type of piezoelectric electro-hydraulic servo valveJournal of Central South University of Technology, 2007
- Hydrolysis of phosphate‐based aviation hydraulic fluidsJournal of Synthetic Lubrication, 1993