Determination of wear metals in lubricating oils by flame atomic absorption spectrophotometry
Author:
- 28 April 2010
- journal article
- Published by Pleiades Publishing Ltd in Journal of Analytical Chemistry
- Vol. 65 (5) , 489-491
Abstract
A simple, rapid and reliable method was developed for the determination of copper, nickel, iron and lead in fresh and used lubricating oil samples by flame atomic absorption spectrophotometry (FAAS). In the present study, a mixture of organic solvents containing propionic acid and iso-butylmethyl ketone (1: 1) was used to extract the metals from lubricating oil samples followed by FAAS analysis. Aqueous standard solutions can be easily employed with the proposed mixed solvent system instead of organometallic standards. The analytical results obtained by employing the proposed solvent extraction system were found to be in good agreement with the results for aqueous media obtained after the destruction of oil samples matrix. Percentage recovery studies showed 88–98% for Cu, 92–95% for Fe, 96–106% for Ni and 84–100% for Pb with relative standard deviation of 2–6%. The developed method was effectively applied to routine determination of Cu, Ni, Fe, and Pb in lubricating oil samples.Keywords
This publication has 14 references indexed in Scilit:
- Liquid chromatographic determination of vanadium in petroleum oils and mineral ore samples using 2-acetylpyridne-4-phenyl-3-thiosemicarbazone as derivatizing reagentTalanta, 2006
- A multicommuted flow system for the determination of copper, chromium, iron and lead in lubricating oils with detection by flame AAS*1Talanta, 2004
- Determination of vanadium, molybdenum and tungsten in complex matrix samples by chelation ion chromatography and on-line detection with inductively coupled plasma mass spectrometryAnalytica Chimica Acta, 2002
- Determination of metals in used lubricating oils by AAS using emulsified samplesTalanta, 1998
- The determination of wear metals in used lubricating oils by flame atomic absorption spectrometry using sulphanilic acid as ashing agentTalanta, 1997
- Instrumental neutron activation analysis of Al, V and Ti employing252Cf as a thermal neutron sourceJournal of Radioanalytical and Nuclear Chemistry, 1995
- Use of emulsion systems for the determination of sulfur, nickel and vanadium in heavy crude oil samples by inductively coupled plasma atomic emission spectrometryJournal of Analytical Atomic Spectrometry, 1994
- Determination of nickel, vanadium, and sulfur in crudes and heavy crude fractions by inductively coupled argon plasma atomic emission spectrometry and flame atomic absorption spectrometryAnalytical Chemistry, 1985
- Analytical applications of emulsions. determination of lead in lubricating oils by atomic absorption spectrometryAnalytica Chimica Acta, 1979
- Mixed-solvent systems for the flame analysis of petroleum materialsThe Analyst, 1970