Performance evaluation of in-situ near-infrared melt pool monitoring during laser powder bed fusion
Open Access
- 10 May 2023
- journal article
- research article
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 18 (1)
Abstract
In-situ co-axial meltpool monitoring has become a popular tool for digitising the laser powder bed fusion (L-PBF) process , providing baseline data for certification. Each layer produces an image where the pixel position represents the laser coordinates and the pixel intensity denotes the sensor response. The 3D image stacks represent the infrared emission during the manufacturing of the physical component. However, interpreting monitoring data remains a challenge. To address this issue, this study evaluates the performance of a near-infrared photodiode in detecting typical geometrical features such as porosity and overhanging structures ranging from the micro-to-meso scale. Monitoring data is highly sensitive to heat accumulation around overhanging structures and can quantify dross formation based on hotspots. Cold spots, which represent a lack of fusion porosity at scan track intersections, can indicate a probability of defect formation. However, the sensitivity and predictive value of monitoring data for porosity are low due to the healing of defects in subsequent layers. Local process variables, such as the scan strategy and part orientation, significantly influence dross and hot spot formation. This study shows the potential of NIR photodiodes in deriving metrics for in-line certification of L-PBF components, leading to improved process control and quality assurance. GRAPHICAL ABSTRACTKeywords
Funding Information
- H2020 European Institute of Innovation and Technology (N 721383)
- Poul Due Jensens Fond
This publication has 39 references indexed in Scilit:
- Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolutionJournal of Alloys and Compounds, 2014
- Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video CameraPhysics Procedia, 2012
- Determination of geometrical factors in Layerwise Laser Melting using optical process monitoringOptics and Lasers in Engineering, 2011
- Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)Physics Procedia, 2011
- Robust threshold estimation for images with unimodal histogramsPattern Recognition Letters, 2010
- Quality control of laser- and powder bed-based Additive Manufacturing (AM) technologiesPhysics Procedia, 2010
- On-line temperature monitoring in selective laser sintering/meltingPhysics Procedia, 2010
- Selective laser sintering (melting) of stainless and tool steel powders: Experiments and modellingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005
- Unimodal thresholdingPattern Recognition, 2001
- Resistance temperature detectors2001