Seismic Performance of Rectangular-Shaped Steel Piers under Cyclic Loading
- 1 February 2005
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 131 (2) , 240-249
Abstract
The purpose of this experimental work is to investigate the seismic resistance characteristics of rectangular-shaped steel bridge piers commonly found in rigid frames, concerning the cross-sectional aspect ratios. To this end, seven specimens were tested under cyclic lateral loads. Six of them were under constant compressive axial load and one was under variable axial load. At first, the effects of web to flange aspect ratio ( W∕F ratio) on the differences between actual and estimated yield displacements, yield loads and flexural stiffness were examined. W∕F ratio of around 2.0 was found to offer minimum difference between those values. Secondly, the effects of W∕F ratio on ultimate strength, ductility, and energy dissipation capacity were determined. The highest strength was observed in columns with a W∕F ratio of about 2.0 while the highest ductility and cumulative energy dissipation capacity were in those with a W∕F ratio of around 1.60. Also, the effect of varying axial load on the strength was examin...Keywords
This publication has 8 references indexed in Scilit:
- Cyclic analysis and capacity prediction of concrete‐filled steel box columnsEarthquake Engineering & Structural Dynamics, 2001
- A CAPACITY PREDICTION PROCEDURE FOR CONCRETE-FILLED STEEL COLUMNSJournal of Earthquake Engineering, 2001
- Stiffened steel box columns. Part 2: Ductility evaluationEarthquake Engineering & Structural Dynamics, 2000
- Stiffened steel box columns. Part 1: Cyclic behaviourEarthquake Engineering & Structural Dynamics, 2000
- Ductility of Thin-Walled Steel Box Stub-ColumnsJournal of Structural Engineering, 2000
- Cyclic behavior of thin-walled steel structures—numerical analysisThin-Walled Structures, 1998
- Cyclic Tests of Concrete-Filled Steel Box ColumnsJournal of Structural Engineering, 1996
- AN EXPERIMENTAL STUDY ON STRENGTH OF THIN-WALLED STEEL BOX BEAM-COLUMNS UNDER REPETITIVE BENDINGDoboku Gakkai Ronbunshu, 1988