Abstract
Smart grids concept provides for broader application of distributed generation (DG) plants which can operate using renewable energy sources in parallel with power accumulators (PA); in which case PA are important smart grids elements possessing number of useful features, such as load curves leveling, providing uninterrupted power supply for especially important consumers, power and frequency damping, ensuring steady operation of DG plants, enhancing power quality. The article is dedicated to issued related to PA use for non-traction consumers power supply; in which case, PA and control algorithms for DG plants voltage and frequency were studied with respect to reduction in the dip depth in power supply systems for normal and emergency modes. The study was carried out in the MATLAB system based on network cluster model performed based on DC link that connects non-traction consumers with DG plants and PA with traction substation 110/27.5/6.3 kV. The computer modeling detected that the use of continuously connected PA on DC buses DC link allows significantly reducing non-traction consumer's depth of dip in case of temporary shut down of the main power supply. In addition, the use of look-ahead control algorithms results in reducing the depth of dip in comparison with traditional ones, considerably decrease of transition process time, voltage and frequency overshoot value in case of power supply temporary shut down of non-traction consumers, and in case of distant three-phase fault.