Design and test of HTS rotor magnets for high energy density motor
- 1 May 2025
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 38 (5) , 055020
Abstract
High-temperature superconducting (HTS) technology enables the realization of compact and efficient designs, with the potential to break through the bottleneck of high-power-density motors. In HTS motors, field windings are crucial components that significantly influence overall performance. The motor’s power capacity is generally proportional to the air gap magnetic field (B g), which is further limited by the critical current of the HTS coils. In this paper, we designed and tested a single pole magnet for the HTS rotor that generated B g of 3.39 T for an air gap of 3.5 mm and 3.04 T for an air gap of 15 mm at 30 K. These results are promising for high-energy-density motors, especially for HTS motors intended for aircraft. In addition, we established a 2D axisymmetric numerical model accommodating the J c ( B , θ ) dependence of the critical current of HTS tapes to yield a more accurate estimation of the critical current of the racetrack coils. This methodology has been validated with various HTS tapes possessing different intrinsic flux pinning properties, demonstrating high accuracy and effective capability in simulating HTS coil performance. This work provided valuable guidance for the design and optimization of future high-power-density superconducting motors, while also validating a universal numerical simulation method.Keywords
Funding Information
- Key R&D Program of China (2022YFE03150200)
- National Natural Science Foundation of China (12374378)
- Shanghai Science and Technology Innovation Program (23511101600)
This publication has 38 references indexed in Scilit:
- Numerical study of the effect of anisotropy and field dependence of critical current on AC loss in REBCO coated conductors and stacksSuperconductivity, 2024
- Optimizing superconducting magnetic bearings of HTS flywheel systems based on 3D H- formulationCryogenics, 2024
- A direct current conversion device for closed HTS coil of superconducting magnetic energy storageJournal of Energy Storage, 2023
- High temperature superconducting rotating electrical machines: An overviewEnergy Reports, 2022
- Numerical modelling of high-temperature superconducting dynamos: A reviewSuperconductivity, 2022
- A finite element model for simulating second generation high temperature superconducting coils/stacks with large number of turnsJournal of Applied Physics, 2017
- An efficient 3D finite element method model based on the T–A formulation for superconducting coated conductorsSuperconductor Science and Technology, 2016
- A self-consistent model for estimating the critical current of superconducting devicesSuperconductor Science and Technology, 2015
- A 1 kA-class cryogen-free critical current characterization system for superconducting coated conductorsReview of Scientific Instruments, 2014
- Study of second generation, high-temperature superconducting coils: Determination of critical currentJournal of Applied Physics, 2012