Microstructural Evolution as a Function of Increasing Aluminum Content in Novel Lightweight Cast Irons
Open Access
Abstract
In the context of the development of new lightweight materials, Al-alloyed cast irons have a great potential for reducing the weight of the different part of the vehicles in the transport industry. The correlation of the amount of Al and its effect in the microstructure of cast irons is not completely well established as it is affected by many factors such as chemical composition, cooling rate, etc. In this work, four novel lightweight cast irons were developed with different amounts of Al (from 0 wt. % to 15 wt. %). The alloys were manufactured by an easily scalable and affordable gravity casting process in an induction furnace, and casted in a resin-bonded sand mold. The microstructural evolution as a function of increasing Al content by different microstructural characterization techniques was studied. The hardness of the cast irons was measured by the Vickers indentation test and correlated with the previously characterized microstructures. In general, the microstructural evolution shows that the perlite content decrease with the increment of wt. % of Al. The opposite occurs with the ferrite content. In the case of graphite, a slight increment occurs with 2 wt. % of Al, but a great decrease occurs until 15 wt. % of Al. The addition of Al promotes the stabilization of ferrite in the studied alloys. The hardness obtained varied from 235 HV and 363 HV in function of the Al content. The addition of Al increases the hardness of the studied cast irons, but not gradually. The alloy with the highest hardness is the alloy containing 7 wt. % Al, which is correlated with the formation of kappa-carbides and finer perlite.Keywords
Funding Information
- Ekonomiaren Garapen eta Lehiakortasun Saila, Eusko Jaurlaritza (KK-2019/00040)
This publication has 26 references indexed in Scilit:
- Effect of Cooling Rate and Aluminium Addition on Graphite Growth during Solidification and GraphitizationMaterials Science Forum, 2018
- Characterization and modeling of the mechanical behavior of high silicon ductile ironMaterials Science and Engineering: A, 2017
- Thermodynamic assessment of the Al-C-Fe systemCalphad, 2017
- Current state of Fe-Mn-Al-C low density steelsProgress in Materials Science, 2017
- Microstructure, hot oxidation resistance and damping capacity of Al- alloyed cast ironInternational Journal of Cast Metals Research, 2016
- On the Eutectoid Reaction in a Quaternary Fe-C-Mn-Al Alloy: Austenite → Ferrite + Kappa-Carbide + M23C6 CarbideMetallurgical and Materials Transactions A, 2013
- Microstructural and mechanical properties (hardness) investigations of Al-alloyed ductile cast ironJournal of Alloys and Compounds, 2010
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- Aluminum-Alloyed Cast Iron as a Versatile AlloyMATERIALS TRANSACTIONS, 2002
- Production of spheroidal graphite aluminium cast iron and the factors affecting itJournal of Materials Processing Technology, 1995