Investigations of TiO2/NanoTiO2 Bimodal Coatings Obtained by a Hybrid PVD/ALD Method on Al-Si-Cu Alloy Substrate
Open Access
Abstract
This study aimed to investigate the influence of bimodal TiO2/nanoTiO2 coatings obtained in the PVD/ALD hybrid process on an Al-Si-Cu-type aluminium alloy on the physicochemical properties of the investigated materials. The reference materials were uncoated substrates and samples coated with TiO2 coatings in single PVD and ALD processes. Tests were carried out on the morphology of coatings using scanning electron microscopy (SEM) and atomic force microscopy (AFM) to determine the structure of the tested coatings and their influence on physicochemical properties. The tests of physicochemical properties were carried out using the potentiodynamic and electrochemical impedance spectroscopy methods. The analysis of corrosion products obtained during the study of physicochemical properties was performed using SEM and EDS analysis. Based on the analysis of anode polarisation curves of the tested materials and Tafel analysis, it was found that a sample demonstrated the highest corrosion resistance with a bimodal coating-type TiO2/nanoTiO2, which had the lowest value of corrosion current and the highest value of polarisation resistance. The slightest corrosion resistance was characteristic for uncovered samples. Moreover, the influence of the tested coatings on the improvement of tribological contact of the surfaces of the coated materials with the counter-specimen made of cemented carbides was demonstrated.Keywords
This publication has 29 references indexed in Scilit:
- Atomic layer deposited TiO2 protects porous ceramic foams from grain boundary corrosionCorrosion Science, 2016
- Corrosion protection of aluminium by ultra-thin atomic layer deposited alumina coatingsCorrosion Science, 2016
- A brief review of atomic layer deposition: from fundamentals to applicationsMaterials Today, 2014
- Corrosion properties of steel protected by nanometre-thick oxide coatingsCorrosion Science, 2014
- Sealing of Hard CrN and DLC Coatings with Atomic Layer DepositionACS Applied Materials & Interfaces, 2014
- Multilayer Al2O3/TiO2 Atomic Layer Deposition coatings for the corrosion protection of stainless steelThin Solid Films, 2012
- Chemical and electrochemical characterization of hybrid PVD+ALD hard coatings on tool steelElectrochemistry Communications, 2009
- Improvement in corrosion resistance of CrN coated stainless steel by conformal TiO2 depositionSurface and Coatings Technology, 2008
- Corrosion resistance of TiO2 films grown on stainless steel by atomic layer depositionSurface and Coatings Technology, 2008
- Investigation of the structure and properties of coatings deposited on ceramic tool materialsInternational Journal of Surface Science and Engineering, 2007