A study on the thermal sintering process of silver nanoparticle inkjet inks to achieve smooth and highly conducting silver layers
- 7 March 2016
- journal article
- research article
- Published by Wiley in Physica Status Solidi (a)
- Vol. 213 (6) , 1403-1409
Abstract
Silver nanoparticle inkjet inks are commonly used to print electrically conductive patterns, such as sensors or electrodes in organic light emitting diodes (OLEDs) or organic photovoltaic devices (OPVs). After printing, a sintering step is required to transform the printed layer into an electrically conductive one. Gaining more insight into the occurring phenomena during this post‐treatment step is necessary when applying different kinds of inkjet ink. Therefore, in this work the commercially available silver nanoparticle inkjet ink Metalon JS‐B30G from Novacentrix is characterised during the different stages in the printing and thermal sintering sequence. The pre‐printing and post‐sintering characterisation proves that the inkjet ink used has got the right material parameters, such as viscosity and particle size. Silver layers with sheet resistances of 40 mΩ/sq were obtained with an average roughness lower than 10 nm. The experiments performed show the different stages during the thermal sintering procedure. Based on this, suitable thermal sintering parameters are defined leading to application of these conductive silver layers in OLEDs.Keywords
Funding Information
- CORNET project POLEOT (IWT-TETRA-120629)
- SIM Soppom+ program
- Hasselt University
This publication has 29 references indexed in Scilit:
- Inkjet Printed Polymer Layer on Flexible Substrate for OLED ApplicationsThe Journal of Physical Chemistry C, 2009
- Inkjet printed, conductive, 25 μm wide silver tracks on unstructured polyimidePhysica Status Solidi (a), 2009
- Inkjet printing and adhesion characterisation of conductive tracks on a commercial printed circuit board materialThin Solid Films, 2009
- Polymer solar cells based on inkjet-printed PEDOT:PSS layerOrganic Electronics, 2009
- Characterization of polymer inks for drop-on-demand printing systemsMicrosystem Technologies, 2008
- Electrode Grids for ITO Free Organic Photovoltaic DevicesAdvanced Materials, 2007
- Ink-jet fabrication of electronic componentsJournal of Micromechanics and Microengineering, 2007
- Thermal decomposition behaviors of PVP coated on platinum nanoparticlesJournal of Applied Polymer Science, 2005
- High-Resolution Ink-Jet Printing of All-Polymer Transistor CircuitsMRS Bulletin, 2001
- The glass transition temperature of poly(N-vinyl pyrrolidone) by differential scanning calorimetryPolymer, 1985