Calibrating a nanoindenter for very shallow depth indentation using equivalent contact radius
Authors:
- 30 March 2010
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 90 (13) , 1819-1832
Abstract
Nanoindenter tips are usually modelled as axisymmetric cones, with calibration involving finding a fitting function that relates contact area to contact depth. For accurate calibration of shallow depth indentation, this is not ideal because it means that deeper indents tend to dominate the fitting function. For an axisymmetric object, it is always possible to define an equivalent contact radius (which, in the case, of nanoindentation is linearly related to the reduced modulus) and to obtain a fitting function that relates this equivalent contact radius to indentation depth. The equivalent contact radius approach is used here to provide shallow depth calibration of a nanoindenter tip at three separate times. The advantage of the equivalent contact radius methodology is that it provides a clearer physical interpretation of the changes in tip shape than a conventional area-based fit. We also show that the minimum depth for a reliable hardness measurement is obtainable and increases as the tip blunts with age but that consistent measurements of very near surface elastic moduli can be made if the blunting of the tip over time is fully accounted for in the tip area function calibration.Keywords
This publication has 12 references indexed in Scilit:
- Inter-relationships between composition and near surface mechanical properties of silicate glassesJournal of Non-Crystalline Solids, 2008
- Nano-indentation and surface hydration of silicate glassesJournal of the Ceramic Society of Japan, 2008
- Determination of mechanical properties by instrumented indentationMeccanica, 2006
- Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stressActa Materialia, 2004
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- Simplified Area Function for Sharp Indenter Tips in Depth-sensing IndentationJournal of Materials Research, 2002
- Elastic loading and elastoplastic unloading from nanometer level indentations for modulus determinationsJournal of Materials Research, 1998
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986
- Hardness measurement at penetration depths as small as 20 nmPhilosophical Magazine A, 1983