Highly conformal SiO2/Al2O3nanolaminate gas-diffusion barriers for large-area flexible electronics applications
Authors:
- Young-Min KimYKYoung-Min Kim
- Young-Wook ParkYPYoung-Wook Park
- Tae-Hyun ParkTPTae-Hyun Park
- Jin-Wook JeongJJJin-Wook Jeong
- Hyun-Ju ChoiHCHyun-Ju Choi
- Eun-Ho SongESEun-Ho Song
- Jin-Woo LeeJLJin-Woo Lee
- Cheol-Ho KimCKCheol-Ho Kim
- Byeong-Kwon JuBJByeong-Kwon Ju
- 29 October 2010
- journal article
- Published by IOP Publishing in Nanotechnology
- Vol. 21 (47) , 475203
Abstract
The present study demonstrates a flexible gas-diffusion barrier film, containing an SiO(2)/Al(2)O(3) nanolaminate on a plastic substrate. Highly uniform and conformal coatings can be made by alternating the exposure of a flexible polyethersulfone surface to vapors of SiO(2) and Al(2)O(3), at nanoscale thickness cycles via RF-magnetron sputtering deposition. The calcium degradation test indicates that 24 cycles of a 10/10 nm inorganic bilayer, top-coated by UV-cured resin, greatly enhance the barrier performance, with a permeation rate of 3.79 × 10(-5) g m(-2) day(-1) based on the change in the ohmic behavior of the calcium sensor at 20 °C and 50% relative humidity. Also, the permeation rate for 30 cycles of an 8/8 nm inorganic bilayer coated with UV resin was beyond the limited measurable range of the Ca test at 60 °C and 95% relative humidity. It has been found that such laminate films can effectively suppress the void defects of a single inorganic layer, and are significantly less sensitive against moisture permeation. This nanostructure, fabricated by an RF-sputtering process at room temperature, is verified as being useful for highly water-sensitive organic electronics fabricated on plastic substrates.Keywords
This publication has 29 references indexed in Scilit:
- The impact of water vapor transmission rate on the lifetime of flexible polymer solar cellsApplied Physics Letters, 2008
- Gas Diffusion Barriers on Polymers Using Multilayers Fabricated by Al2O3 and Rapid SiO2 Atomic Layer DepositionThe Journal of Physical Chemistry C, 2008
- Self‐Organized Gradient Hole Injection to Improve the Performance of Polymer Electroluminescent DevicesAdvanced Functional Materials, 2007
- Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymersApplied Physics Letters, 2006
- High-Performance Transparent Barrier Films of SiO[sub x]∕SiN[sub x] Stacks on Flexible Polymer SubstratesJournal of the Electrochemical Society, 2006
- A hybrid encapsulation of organic light-emitting devicesJournal of Physics D: Applied Physics, 2005
- Passivation of organic light-emitting diodes with aluminum oxide thin films grown by plasma-enhanced atomic layer depositionApplied Physics Letters, 2004
- Thin film encapsulated flexible organic electroluminescent displaysApplied Physics Letters, 2003
- Organic light-emitting devices with extended operating lifetimes on plastic substratesApplied Physics Letters, 2002
- Water Vapor and Oxygen Degradation Mechanisms in Organic Light Emitting DiodesAdvanced Functional Materials, 2001