Circumferential Expansion Property of Composite Wrapping System for Main Cable Protection of Suspension Bridge
Open Access
- 5 May 2020
- journal article
- research article
- Published by Wiley in Advances in Polymer Technology
- Vol. 2020, 1-18
Abstract
A composite wrapping system for main cable protection of suspension bridges was designed by using prepreg fiber-reinforced composites and nitrile rubber. The circumferential expansion performance of the system was tested, and the curves of circumferential bearing capacity and radial displacement of the components were obtained. Failure modes of each group of components were compared and analyzed. The results show that most of the components are vertically fractured at the lap transition. The increase of the number of prepreg layers contributed the most to the circumferential bearing capacity of components, with a growth rate of 65.31%~109.01%. The increase of rubber belt layers had the most significant effect on the radial displacement of the components, with a growth rate of 7.06%~23.5%. In the initial stage of the test, the strain of each part of the component was smaller due to the compaction by the loading device, and the strain value of the component was generally linearly increased during the loading process, during which the strain of the overlap was the smallest. The calculated cross-sectional temperature deformation of the main cable is in good agreement with the experimental data. The application of the rubber belt increases the deformation of the main cable; therefore, the protection system for the main cable could have more deformation redundancy and delay the arrival of the ultimate strain of the outer prepreg wrap.Keywords
Funding Information
- Nanjing Tech University (2019YFD1101205, BK20190034, 51778285)
- National Key Research and Development Program of China (2019YFD1101205, BK20190034, 51778285)
- Natural Science Foundation for Distinguished Young Scholars of Jiangsu Province (2019YFD1101205, BK20190034, 51778285)
- National Natural Science Foundation of China (2019YFD1101205, BK20190034, 51778285)
This publication has 24 references indexed in Scilit:
- Connections and structural applications of fibre reinforced polymer composites for civil infrastructure in aggressive environmentsComposites Part B: Engineering, 2019
- Parametric test for the preliminary design of suspension bridgesInternational Journal of Advanced Structural Engineering, 2017
- A failure analysis study of a prestressed steel cable of a suspension bridgeCase Studies in Construction Materials, 2015
- On the Development and Innovation of Modern Suspension Bridge in ChinaApplied Mechanics and Materials, 2014
- NON-LINEAR ANALYSIS OF SUSPENSION BRIDGES WITH FLEXIBLE AND RIGID CABLESJOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2010
- Akashi Kaikyo BridgeAmerican Scientist, 2009
- Considerations on recent trends in, and future prospects of, steel bridge construction in JapanJournal of Constructional Steel Research, 2006
- Main Cable Corrosion Protection by Dehumidification2006
- High Strength Galvanized Wire for Bridge CablesMaterials Science Forum, 2003
- FRP jacketed concrete under uniaxial compressionConstruction and Building Materials, 1995