Effect of oblique stator on the aerodynamic performance and erosion characteristics of governing stage blades in a supercritical steam turbine
Open Access
- 12 February 2019
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 11 (2)
Abstract
In this article, a new particle tracking model is established through high temperature erosion modeling test. Based on the model, steam-particle flows in the governing stage cascade of a supercritical steam turbine are systematically investigated and the influence of oblique stator on the aerodynamic performance and erosion characteristics of governing stage blades is carefully studied. Results show that with the increase of nozzle oblique angle, the maximum load position gradually moves toward nozzle trailing edge. Consequently, secondary flow loss of nozzle cascade gradually decreases. Compared with the prototype structure of governing stage, stage efficiency increases by 0.8%, 0.35%, and 0.44%, respectively, when nozzle oblique angle increases to 15°, 30°, and 45°. Meanwhile, erosion at the trailing edge of nozzle pressure side and leading edge of rotor suction side gradually decreases, while erosion of rotor pressure surface increases. The maximum erosion position of nozzle pressure surface and rotor suction surface keeps constant, but the maximum erosion position of rotor pressure surface gradually moves forward. Comprehensive analysis shows that when nozzle oblique angle reaches 30°, erosion of nozzle trailing edge reduces by 14%, and stage efficiency increases by 0.35%; erosion resistance and aerodynamic performance of governing stage can be both well considered.Keywords
Funding Information
- National Natural Science Foundation of China (51606152)
- Science and Technology Project of Huaneng Group Headquarters (HNKJ16-H09)
This publication has 21 references indexed in Scilit:
- Performance deterioration of the governing stage nozzle caused by solid particle erosion in the steam turbineProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2010
- Effects of Coating Thickness, Test Temperature, and Coating Hardness on the Erosion Resistance of Steam Turbine BladesJournal of Engineering for Gas Turbines and Power, 2009
- Predictive tools for the design of erosion resistant coatingsSurface and Coatings Technology, 2008
- Design of hard coating architecture for the optimization of erosion resistanceWear, 2008
- Numerical investigation of the solid particle erosion rate in a steam turbine nozzleApplied Thermal Engineering, 2007
- Nozzle passage aerodynamic design to reduce solid particle erosion of a supercritical steam turbine control stageWear, 2007
- Erosion resistance of superalloys and different coatings exposed to particulate flows at high temperatureSurface and Coatings Technology, 1999
- A numerical investigation of solid particle erosion experienced within oilfield control valvesWear, 1998
- Erosion behavior of uncoated Waspaloy and Waspaloy coated with titanium carbideSurface and Coatings Technology, 1997
- Erosion rate testing at high temperature for turbomachinery useSurface and Coatings Technology, 1995