Sustainable Vacuum-Infused Thermoplastic Composites for MW-Size Wind Turbine Blades—Preliminary Design and Manufacturing Issues
Authors:
- 21 June 2005
- journal article
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 127 (4) , 570-580
Abstract
This paper addresses the feasibility of using innovative vacuum infused anionic polyamide-6 (PA-6) thermoplastic composites for MW-size wind turbine blades structures. To compare the performance of this fully recyclable material against commonly used less sustainable thermoset blade materials in a baseline structural MW-size blade configuration (box-spar/skins), four different blade composite material options were investigated: Glass/epoxy, carbon/epoxy, glass/PA-6, and carbon/PA-6. Blade characteristics such as weight, costs, and natural frequencies were compared for rotor blades ranging between 32.5 and in length, designed according to both stress and tip deflection criteria. Results showed that the PA-6 blades have similar weights and natural frequencies when compared to their epoxy counterpart. For glass fiber blades, a 10% reduction in material cost can be expected when using PA-6 rather than epoxy while carbon fiber blades costs were found to be similar. Considering manufacturing, processing temperatures of PA-6 are significantly higher than for epoxy systems; however, the associated cost increase is expected to be compensated for by a reduction in infusion and curing time.
Keywords
This publication has 6 references indexed in Scilit:
- Power Regulation and Optimization of Offshore Wind Turbines Through Trailing Edge Flap Control2005
- Blade System Design Studies Volume I: Composite Technologies for Large Wind Turbine Blades2002
- Fatigue of Composite Materials and Substructures for Wind Turbine Blades2002
- High-temperature off-axis fatigue behaviour of unidirectional carbon-fibre-reinforced composites with different resin matricesComposites Science and Technology, 2001
- WindPACT Turbine Design Scaling Studies Technical Area 1-Composite Blades for 80- to 120-Meter Rotor2001
- Effects of Matrix Toughness on Fatigue Response of Graphite Fiber Composite Laminates1989