Successive Grinding and Polishing Effect on the Retained Austenite in the Surface of 42CrMo4 Steel
Open Access
Abstract
Low-alloy 42CrMo4 steels were studied by 57Fe Mössbauer spectroscopy (MS), X-ray diffractometry (XRD), and Energy Dispersive X-ray Spectroscopy (EDS) measurements. The investigations were performed on metallographic samples, which were subjected to a series of successive grinding and polishing with a progressively finer grit. Conversion X-ray Mössbauer spectroscopy (CXMS) was used to determine the occurrence of austenite in steel samples. It is a unique method detecting the austenite content very sensitively. Six samples with different surface preparation were investigated, starting with 4.8% of austenite on an as-cut sample, and a large decrease in the retained austenite to 2.6% was observed after the first grinding of a hardened cut sample. Additionally, an unexpectedly large decrease in the austenite content to 2.3% was found due to the final polishing. A second time applied successive grinding and polishing of all samples resulted in identical austenite content determined by CXMS of approx. 5%, which proved the applicability of the CXMS method. Generally, the result calls attention to the importance of preparation of metallurgical samples by grinding and polishing where the results can vary significantly on the level of surface processing.Keywords
Funding Information
- Univerzita Palackého v Olomouci (IGA_PrF_2021_003)
- Czech Ministry of Education, Youth and Sports (CZ.02.1.01/0.0/0.0/17_049/0008408)
This publication has 36 references indexed in Scilit:
- Effect of Multi-Step Tempering on Retained Austenite and Mechanical Properties of Low Alloy SteelJournal of Iron and Steel Research International, 2011
- User-friendly software for Mössbauer spectrum analysisJournal of Radioanalytical and Nuclear Chemistry, 1996
- Mossbauer studies on aging of deformed Fe-6Mn-2Cr-1C alloyScripta Metallurgica et Materialia, 1995
- Surface modifications of upgraded high-speed tool steelHyperfine Interactions, 1994
- A study on the formation of wear debris during abrasionTribology International, 1985
- DETERMINATION OF RETAINED AUSTENITE IN STEELS ALLOYED WITH CARBIDE FORMERSLe Journal de Physique Colloques, 1979
- The use of Mössbauer spectroscopy in non-destructive testingNDT International, 1977
- STRUCTURE INVESTIGATION AND PHASE ANALYSIS OF Fe-Cr CARBIDESLe Journal de Physique Colloques, 1976
- APPLICATIONS OF MÖSSBAUER SCATTERING TECHNIQUESLe Journal de Physique Colloques, 1976
- Retained austenite developed during surface grinding of a carbon steelScripta Metallurgica, 1972