Study on the Characteristics of Traction Forces Difference Asymmetric Steering Bogies
Authors:
Open Access
- 14 November 2016
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2016, 1-10
Abstract
This article comes up with a new concept of applying the difference between traction forces on front and rear wheelsets to guiding control, as well as the design of a new type of structurally simple asymmetrical radial bogies, which lead to the proposition of traction forces difference-steering asymmetric radial bogies. The traction forces difference-steering asymmetric radial bogies are referred to as TFDA-bogies, in which the difference of longitudinal creep forces between front and rear wheels produces radial steering of both wheelsets. The concept of traction difference is incorporated into guiding control and bogie structure is also simplified in the form of asymmetrical radial bogies. Angle sensors are mounted to facilitate the change of electric currents of the front and rear traction motors to control the guiding mechanism so that wheelsets can adopt the radial position. With SIMPACK, the multibody dynamics analysis software, three whole vehicle models of TFDA-bogies, radial bogies, and conventional bogies are set up and comparative analyses are made on the lead wheel angle of attack, lead wheel lateral force, lead wheel friction power, and total vehicle friction power under idle running condition and traction condition, respectively. Results show that TFDA-bogies are radial bogies with simplified structure.Keywords
Funding Information
- Traction Power State Key Laboratory (2016TPL-T10, 51575458)
- National Natural Science Foundation of China (2016TPL-T10, 51575458)
This publication has 12 references indexed in Scilit:
- Condition Monitoring Opportunities Using Vehicle-Based SensorsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2011
- Control Engineering Challenges for Railway Trains of the FutureMeasurement and Control, 2011
- Spin moment calculation and its importance in railway dynamicsProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2009
- Influence of creep forces on the risk of derailment of railway vehiclesVehicle System Dynamics, 2009
- Influence of longitudinal creepage and wheel inertia on short-pitch corrugation: A resonance-free mechanism to explain the roaring rail phenomenonProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008
- Idealized steering for hauling locomotivesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2007
- Active yaw damper for the improvement of railway vehicle stability and curving performances: simulations and experimental resultsVehicle System Dynamics, 2006
- Creep forces in simulations of traction vehicles running on adhesion limitWear, 2005
- A Qualitative Analysis of the Dynamics of Self-Steering Locomotive TrucksVehicle System Dynamics, 2002
- A design methodology for wheel and rail profiles for use on steered railway vehiclesWear, 1991