Dynamic Analysis of Cage Behavior in a Tapered Roller Bearing
- 4 March 2006
- journal article
- Published by ASME International in Journal of Tribology
- Vol. 128 (3) , 604-611
Abstract
A three-dimensional dynamic simulation analysis of a tapered roller bearing was performed using commercially available software. Without cage pocket shape simplification, the dynamic motion of the cage and rollers was calculated in six degrees of freedom. The motion of the cage and rollers was measured experimentally to verify the analysis. Under all axially loaded conditions, cage whirl was analytically predicted and experimentally confirmed. Whirl amplitude increased as the inner-ring rotational speed and axial-load magnitude increased. The maximum whirl amplitude reached the radial clearance between a roller and its pocket. Under combined load conditions, the cage also whirled. However, the whirl amplitude was smaller than only under axial load. Load distribution due to the addition of radial load to axial load equalized roller distribution. Equally distributed rollers limited the cage’s movable distance to circumferential clearance between a roller and its pocket.Keywords
This publication has 9 references indexed in Scilit:
- Ball Bearing and Tapered Roller Bearing Torque: Analytical, Numerical and Experimental ResultsTribology Transactions, 2002
- A dynamic analysis of tapered roller bearing under fully flooded conditions part 1: theoretical formulationWear, 1995
- Torque of Tapered Roller BearingsJournal of Tribology, 1991
- Simple Formulas for Performance Parameters Used in Elastohydrodynamically Lubricated Line ContactsJournal of Tribology, 1989
- On the Dynamics of a Tapered Roller BearingJournal of Tribology, 1989
- A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts. I. Direction of lubricant entrainment coincident with the major axis of the Hertzian contact ellipseProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1985
- Advanced Dynamics of Rolling Elements1984
- Effect of Geometry on Hydrodynamic Film ThicknessJournal of Lubrication Technology, 1979
- A General Theory for Elastically Constrained Ball and Radial Roller Bearings Under Arbitrary Load and Speed ConditionsJournal of Basic Engineering, 1960