Phaser-Based Transfer Function Analysis of Power Synchronization Control Instability for a Grid Forming Inverter in a Stiff Grid
Authors:
Open Access
- 26 April 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 42146-42159
Abstract
The grid forming inverter (GFM) is considered a key technology to solve the issues of inverter-based resource (IBR)-rich grids. Many studies have investigated how GFM affects and improves power system stability. However, few studies have considered the instability of GFM as it relates to various grid conditions. This paper discusses the mechanism of power synchronization control instability of GFM by conducting transfer function analysis with focus on various grid conditions, the control logic of GFM, and relevant parameter setting. Based on the above analysis, a procedure for power synchronization controller design of GFM is proposed. Experimental tests in the control hardware in the loop (CHIL) environment are performed to verify the validity of the transfer function analysis and reveal that the instability of GFM is likely to occur when it is connected to stiff grids or experiences a larger phase delay due to a longer power measurement delay and lower damping of the controller.Keywords
This publication has 23 references indexed in Scilit:
- A Comparative Study of Two Widely Used Grid-Forming Droop Controls on Microgrid Small-Signal StabilityIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- Virtual Impedance Design Considerations for Virtual Synchronous Machines in Weak GridsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- An Improved Virtual Inertia Control for Three-Phase Voltage Source Converters Connected to a Weak GridIEEE Transactions on Power Electronics, 2018
- Comparison of Grid Following and Grid Forming Control for a High Inverter Penetration Power System2018
- Hardware-in-the-Loop (HIL) Simulations for Smart Grid Impact Studies2018
- Instantaneous penetration level limits of non‐synchronous devices in the British power systemIET Renewable Power Generation, 2017
- Use of an inertia-less Virtual Synchronous Machine within future power networks with high penetrations of converters2016
- Small-Signal Modeling and Parameters Design for Virtual Synchronous GeneratorsIEEE Transactions on Industrial Electronics, 2016
- Comparison of Dynamic Characteristics Between Virtual Synchronous Generator and Droop Control in Inverter-Based Distributed GeneratorsIEEE Transactions on Power Electronics, 2015
- Design and Control of an LCL-Filter-Based Three-Phase Active RectifierIEEE Transactions on Industry Applications, 2005