Pore-Level Modeling of Isothermal Drying of Pore Networks Accounting for Evaporation, Viscous Flow, and Shrinking
Authors:
- 1 September 2005
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 23 (9-11) , 2007-2019
Abstract
Simulation results of pore-level drying of non-hygroscopic, non-rigid, liquid-wet porous media are presented. Two- and three-dimensional pore networks represent pore spaces. Two kinds of mechanisms are considered: evaporation and hydraulic flow. The process is considered under isothermal conditions. Capillary forces thus dominate over viscous forces and the drying is considered as a modified form of invasion percolation. Liquid in pore corners allows for hydraulic connection throughout the network. During drying, liquid is replaced by vapor by two fundamental mechanisms: evaporation and pressure gradient–driven liquid flow. The development of capillary pressure as menisci turn concave induces shrinkage of the matrix, which contributes to the pressure gradient that drives liquid toward the surface of the network. Using Monte Carlo simulation, we find evaporation and drainage times; the shortest calculated indicates the controlling mechanism. Here we report distributions of liquid and vapor as drying time advances. For the calculation of transport properties, details of pore space and displacement are subsumed in pore conductances. Solving for the pressure field in each phase, vapor and liquid, we find a single effective conductance for each phase as a function of liquid saturation. Along with the effective conductance for the liquid-saturated network, the relative permeability of liquid and diffusivity of vapor are calculated.Keywords
This publication has 11 references indexed in Scilit:
- Drying induced stresses estimated on the base of elastic and viscoelastic modelsChemical Engineering Journal, 2002
- A 2-D pore-network model of the drying of single-component liquids in porous mediaAdvances in Water Resources, 2001
- Scaling theory of drying in porous mediaPhysical Review E, 1999
- Percolation model of drying under isothermal conditions in porous mediaInternational Journal of Multiphase Flow, 1993
- MICROSCOPIC DETERMINATION OF TRANSPORT PARAHETERS IN DRYING POROUS MEDIADrying Technology, 1992
- Determination d'un réseau aleatoire de pores pour modéliser la sorption et la migration d'humidité dans un mortier de cimentInternational Journal of Heat and Mass Transfer, 1991
- Drying gelsJournal of Non-Crystalline Solids, 1986
- Movement of a Drying Front in a Porous MaterialMRS Proceedings, 1986
- Deformation of solid surfaces due to capillary forcesJournal of Colloid and Interface Science, 1984
- Studies in the physical properties of soil. V. The hysteresis effect in capillary properties, and the modes of moisture distribution associated therewithThe Journal of Agricultural Science, 1930