Hybrid composites of Al5083- graphene - fly ash by friction stir processing: machining studies
Open Access
- 1 September 2021
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1185 (1) , 012005
Abstract
Hybrid composites are the modern engineered materials which exhibit presence of two or more than two reinforcements in a matrix. In the current work, Al5083 - Graphene and fly ash were dispersed in Al5083 alloy to develop hybrid composites by friction stir processing (FSP). Microstrucutral studies revealed band structures in the stir zone. Increased hardness was measured for the composites due to the grain refinement resulted from FSP and also due to the presence of reinforcements (Graphene and fly ash). The variations within the measured hardness values were observed as higher for the composites due to the variations in the concentration of the Graphene and fly ash in the stir zone. Lower cutting forces were recorded for the composites during drilling experiments conducted on the base materials and the composites. Here, the role of graphene as solid lubricant can be noticed as an important factor. The overall results demonstrate that Al5083-Graphene-fly ash hybrid composites can be successfully developed by FSP which exhibit better mechanical properties and machining behaviour.Keywords
This publication has 5 references indexed in Scilit:
- Investigating Mechanical Properties, Corrosion Resistance and Machining Characteristics of Al5083-Graphene Composites Produced by Friction Stir ProcessingTransactions of the Indian Institute of Metals, 2020
- Hardness and sliding wear characteristics of AA7075-T6 surface composites reinforced with B4C and MoS2 particlesMaterials Research Express, 2019
- A brief overview on synthesis and applications of graphene and graphene-based nanomaterialsFrontiers of Materials Science, 2019
- On the Al5083–Al2O3–TiO2 Hybrid Surface Nanocomposite Produced by Friction Stir ProcessingProtection of Metals and Physical Chemistry of Surfaces, 2018
- Friction stir processing: a novel technique for fabrication of surface compositeMaterials Science and Engineering: A, 2003