Measurement System for the Characterization of the Human Body as a Communication Channel at Low Frequency
Authors:
- Adrian LehnerALAdrian Lehner
- Juerg FroehlichJFJuerg Froehlich
- Robert ReutemannRRRobert Reutemann
- Michael OberleMOMichael Oberle
- Norbert FelberNFNorbert Felber
- Niels KusterNKNiels Kuster
- Otto HessOHOtto Hess
- Wolfgang FichtnerWFWolfgang Fichtner
- 1 January 2005
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2005 (1094687X) , 3502-3505
Abstract
Electronic data transfer by capacitive and galvanic coupling through the human body has been proposed by research and industry as a novel but highly promising technology for ultra low power wireless body LANs. Investigation on the most challenging questions considering data communication becomes enabled with a highly versatile measurement system for frequencies in the range of 10kHz to 1MHz. The human body is characterized as a transmission medium for electrical current by means of measurements and is investigated as communication channel for biomedical parameter monitoring by using different modulation schemes at low frequency. Excellent transmission was achieved on the thorax while the attenuation increases along the extremities. The injected current is 10 times below the maximum allowed contact current and more than 25 times below nerve stimulation. The new technology has shown its feasibility in clinical trialsKeywords
This publication has 5 references indexed in Scilit:
- Sensitive and stable electro-optic sensor for intrabody communication2004
- A Near-Field-Sensing Transceiver for Intrabody Communication Based on the Electrooptic EffectIEEE Transactions on Instrumentation and Measurement, 2004
- A very low-power consumption wireless ECG monitoring system using body as a signal transmission medium2002
- Empirical measurements of intrabody communication performance under varied physical configurations2001
- “Body coupled FingerRing”1997