3D numerical simulation of a lab-on-a-chip—increasing measurement sensitivity of interdigitated capacitors by passivation optimization
- 1 January 2011
- journal article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 11 (7) , 1318-1325
Abstract
Interdigital electrode structures (IDES) play a major role in many technical and analytical applications. In particular, they are a key technology in modern lab-on-a-chip (LOC) devices. As high sensitivity is a key component of any (bio)analytical method, the presented work is aimed at designing a novel dielectric sensing system, which exhibits maximum sensor sensitivity using passivated dielectric microsensors. Although the implementation of high-εr dielectric passivation materials such as tantalum oxide or titanium oxide showed increased sensor sensitivity by a factor of 5, simulations revealed that sensor sensitivity is ultimately determined by the dielectric properties of the analyte. Ideally, dielectric properties of the passivation material need to be adjusted to the dielectric properties of the material under investigation and any deviations (e.g. higher or lower dielectric constants) will result in significant loss of sensitivity. To address these shortcomings we have developed a novel dielectric sensing concept based on a dual-material passivation geometry. The novel design consists of electric flux barriers that are layered between the finger electrodes, as well as electric flux guides which are located above the electrode structures that direct the entire generated electric flux to the object under investigation. Our 3D numerical results clearly show that the novel design offers two main advantages: firstly, the measurement sensitivity is further increased by more than a factor of two in comparison to a homogeneous passivation material sensing strategy. Secondly, maximum sensitivity for a given set of finger geometries can be achieved using a single sensor design regardless of the frequency-dependent dielectric properties of the measured objects. Hence, the novel approach is capable of reducing design and manufacturing costs of lab-on-a-chip devices.Keywords
This publication has 30 references indexed in Scilit:
- Efficient Dielectrophoretic Patterning of Embryonic Stem Cells in Energy Landscapes Defined by Hydrogel GeometriesAnnals of Biomedical Engineering, 2010
- Real-time detection of food-borne bacterial adenosine triphosphate (ATP) using dielectrophoretic force and a bioluminescence sensorMicrochimica Acta, 2010
- Dielectrophoretically assembled particles: feasibility for optofluidic systemsMicrofluidics and Nanofluidics, 2010
- Detection of viruses with molecularly imprinted polymers integrated on a microfluidic biochip using contact-less dielectric microsensorsLab on a Chip, 2009
- Development of a Disposable Microfluidic Biochip for Multiparameter Cell Population MeasurementsAnalytical Chemistry, 2009
- Microfluidic Systems for Pathogen Sensing: A ReviewSensors, 2009
- Interdigitated impedance sensors for analysis of biological cells in microfluidic biochipse+i Elektrotechnik und Informationstechnik, 2009
- Voltage tunable capacitors using high temperature superconductors and ferroelectricsIEEE Transactions on Applied Superconductivity, 1994
- Interdigital Capacitors and Their Application to Lumped-Element Microwave Integrated CircuitsIEEE Transactions on Microwave Theory and Techniques, 1970
- Electric Moments of Molecules in LiquidsJournal of the American Chemical Society, 1936