Experimental Investigation of Mechanically Coupled Composite Specimens in the ENF Test Configuration
Open Access
- 26 October 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 416 (1) , 012041
Abstract
This paper reports an experimental study on the mode II interlaminar fracture of carbon/epoxy multidirectional (MD) laminates as well as on composite laminates with specific stacking sequence exhibited mechanical couplings. The aim of the analysis was to determine the mode II critical strain energy release rate (c-SERR, G IIC) and an applicability of the data reduction schemes. Specimens were subjected to the end notched flexure (ENF) test. During the experiment the applied load and the load point displacement were registered. Additionally, the crack onset and all propagation values were observed and marked on the specimens edges. Moreover, the acoustic emission (AE) data were registered. The values of the mode II c-SERR were obtained with assumptions of the Direct Beam Theory (DBT) and Corrected Beam Theory (CBT). The experiment proved that the fracture toughness depends on the specimen delamination interface. For the asymmetric laminates, the mode II c-SERR reached significantly greater values for those specimens where the bending-extension coupling (BE) occurred.Keywords
This publication has 13 references indexed in Scilit:
- Numerical modeling and experimental testing of the DCB laminated composite beams with mechanical couplingsAIP Conference Proceedings, 2018
- An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loadingComposites Part B: Engineering, 2017
- On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated compositesComposite Structures, 2017
- Experimental investigation of failure process in compressed channel-section GFRP laminate columns assisted with the acoustic emission methodComposite Structures, 2015
- Mode II interlaminar fracture of carbon/epoxy multidirectional laminatesComposites Science and Technology, 2004
- Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite jointInternational Journal of Adhesion and Adhesives, 2000
- Delamination Fracture of Multidirectional Carbon-Fiber/Epoxy Composites under Mode I, Mode II and Mixed-Mode I/II LoadingJournal of Composite Materials, 1999
- Beam analysis of angle-ply laminate end-notched flexure specimensComposites Science and Technology, 1998
- Effects of Mode Ratio, Ply Orientation and Precracking on the Delamination Toughness of a Laminated CompositeJournal of Reinforced Plastics and Composites, 1996
- Interlaminar shear fracture of laminated compositesInternational Journal of Fracture, 1990