Comparing the Effect of Fuel/Air Interactions in a Modern High-Speed Light-Duty Diesel Engine
- 4 September 2017
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Modern diesel cars, fitted with state-of-the-art aftertreatment systems, have the capability to emit extremely low levels of pollutant species at the tailpipe. However, diesel aftertreatment systems can represent a significant cost, packaging and maintenance requirement. Reducing engine-out emissions in order to reduce the scale of the aftertreatment system is therefore a high priority research topic. Engine-out emissions from diesel engines are, to a significant degree, dependent on the detail of fuel/air interactions that occur in-cylinder, both during the injection and combustion events and also due to the induced air motion in and around the bowl prior to injection.In this paper the effect of two different piston bowl shapes are investigated. Experiments are performed in a single-cylinder engine fitted with a production cylinder head and fuel injector in order to quantify the effect of the bowl shape and spray targeting-varied by varying the injector nozzle tip protrusion-on emissions and fuel consumption. Multi-dimensional CFD modelling is used to detail the effect of these geometry changes on the in-cylinder flow and fuel/air mixing processes thereby guiding the interpretation and understanding of the experimental results. The results suggest that improvements in engine-out emissions, as well as fuel consumption, may be obtained from current diesel engines by the careful matching of combustion system geometry with fuel injection hardware and strategy, and that an integrated approach with experimental and numerical studies working in parallel is essential to maximise these benefits.Keywords
This publication has 23 references indexed in Scilit:
- Analytical and Developmental Techniques Utilized in the Structural Optimization of a New Lightweight Diesel EngineSAE International Journal of Engines, 2015
- Bowl Shape Design Optimization for Engine-Out PM Reduction in Heavy Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2015
- On the use of a tabulation approach to model auto-ignition during flame propagation in SI enginesApplied Energy, 2011
- Examination of Initialization and Geometric Details on the Results of CFD Simulations of Diesel EnginesJournal of Engineering for Gas Turbines and Power, 2010
- The 3-Zones Extended Coherent Flame Model (Ecfm3z) for Computing Premixed/Diffusion CombustionOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2004
- Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressureCombustion and Flame, 2004
- A New Droplet Collision AlgorithmJournal of Computational Physics, 2000
- MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODELAtomization and Sprays, 1999
- A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modelingInternational Journal of Heat and Mass Transfer, 1997
- Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε ModelsCombustion Science and Technology, 1995