Use of Betaine-Based Gel and Its Potential Application in Enhanced Oil Recovery
Open Access
Abstract
In this paper, a betaine-based gel containing 2.0% erucamide propyl betaine (EAPB), 0.5% oleic acid amide propyl betaine (OAPB), and 0.1% KCl was prepared for use as a fracturing fluid. The performance evaluation showed that KCl may improve the temperature resistance and increase the viscosity of the optimized fracturing fluid. At 80 °C, the apparent viscosity of the viscoelastic surfactant (VES)-based fracturing fluid was approximately 50 mPa·s. Furthermore, the gel had high shear resistance, good viscosity stability, and high sand-carrying performance. After being sheared at 170 s−1 for 60 min, the reduction in viscosity was 13.6%. The viscosity of the gel was relatively stable at room temperature (27 °C) for one week. In a suspension containing 10% sand (particle size < 0.45 mm, density = 2.75 g cm−3), the settling velocity of proppant particles was 1.15 cm h−1. In addition, we detected that the critical micelle concentration of this gel was approximately 0.042 wt%. The viscosity could be reduced to <5 mPa·s at 60 °C within 1 h when 6.0% crude oil was present, and oil displacement experiments showed that the broken fracturing fluid can enhance the oil displacement rate up to 14.5%. This work may facilitate research on fracturing fluids and oil recovery.Keywords
Funding Information
- Youth Innovation Team of Shaanxi University, the Natural Science Basic Research Program of Shaanxi (2020JQ-775, 21JP094)
- Scientific Research Program funded by the Shaanxi Provincial Education Department (2020JQ-775, 21JP094)
This publication has 38 references indexed in Scilit:
- Phase behaviour and thermodynamic properties of lamellar liquid crystal developed for viscoelastic surfactant based fracturing fluidChemical Engineering Science, 2015
- Monitoring the Transition from Spherical to Polymer‐like Surfactant Micelles Using Small‐Angle X‐Ray ScatteringAngewandte Chemie International Edition, 2014
- A Pore-level Investigation of Surfactant-crude Oil Displacements Behavior in Fractured Porous Media Using One-quarter Five Spot MicromodelsEnergy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2014
- Study of Oil Displacement Performance of Hydroxyl Sulfobetaine SurfactantAdvanced Materials Research, 2013
- Thermally induced structural transitions from fluids to hydrogels with pH-switchable anionic wormlike micellesJournal of Colloid and Interface Science, 2013
- Hydrogel from crosslinked polyacrylamide/guar gum graft copolymer for sorption of hexavalent chromium ionCarbohydrate Polymers, 2011
- Rheological properties of guar and its methyl, hydroxypropyl and hydroxypropyl-methyl derivatives in semidilute and concentrated aqueous solutionsPolymer, 2010
- Nanotechnology Applications in Viscoelastic Surfactant Stimulation FluidsSPE Production & Operations, 2008
- Hydrophobic guar gum derivatives prepared by controlled grafting processesPolymers for Advanced Technologies, 2007
- Theory of self-assembly of hydrocarbon amphiphiles into micelles and bilayersJournal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics, 1976