Synthesis, characterization, bioactivity and biocompatibility of nanostructured materials based on the wollastonite‐poly(ethylmethacrylate‐co‐vinylpyrrolidone) system
- 7 February 2008
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 88A (1) , 53-64
Abstract
Composite materials are very promising biomaterials for hard tissue augmentation. The approach assayed in this work involves the manufacturing of a composite made of a bioactive ceramic, natural wollastonite (W) and a nanostructured copolymer of ethylmethacrylate (EMA) and vinylpyrrolidone (VP) to yield a bioresorbable and biocompatible VP–EMA copolymer. A bulk polymerization was induced thermally at 50°C, using 1 wt % azobis(isobutyronitrile) (AIBN) as free‐radical initiator. Structural characterization, compressive strength, flexural strength (FS), degradation, bioactivity, and biocompatibility were evaluated in specimens with a 60/40 VP/EMA ratio and ceramic content in the range 0–60%. A good integration between phases was achieved. Greater compression and FS, in comparison with the pure copolymer specimens was obtained only when the ceramic load got up to 60% of the total weight. The soaking in NaCl solution resulted in the initial swelling of the specimens tested. The maximum swelling was reached after 2–3 h of immersion and it was significantly greater for lower ceramic loads. This result makes the polymer component the main responsible for the interactions with the media. After soaking in SBF, microdomains segregation can be observed in the polymer component that can be related with a dramatic difference in the reactivity of both monomers in free radical polymerization, whereas the formation of an apatite‐like layer on the W surfaces can be observed. Biocompatibility in vitro studies showed the absence of cytotoxicity of all formulations. The cells were able to adhere on the polystyrene negative control and on specimens containing 60 wt % wollastonite forming a monolayer and showing a normal morphology. However, a low cellular growth was observed. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res, 2009Keywords
This publication has 50 references indexed in Scilit:
- The reinforcement effect of nano and microfillers on fracture toughness of two provisional resin materialsMaterials & Design (1980-2015), 2007
- Wollastonite-Poly(Ethylmethacrylate-Co-Vinylpyrrolydone) Nanostructured Materials: Mechanical Properties and BiocompatibilityKey Engineering Materials, 2006
- Preparation and in vitro bioactivities of calcium silicate nanophase materialsMaterials Science and Engineering: C, 2005
- Evaluation of cytocompatibility and bending modulus of nanoceramic/polymer compositesJournal of Biomedical Materials Research Part A, 2004
- Fabrication and characterization of bioactive wollastonite/PHBV composite scaffoldsBiomaterials, 2004
- In vitro behavior of osteoblastic cells cultured in the presence of pseudowollastonite ceramicJournal of Biomedical Materials Research Part A, 2004
- Morphological and structural study of pseudowollastonite implants in boneJournal of Microscopy, 2000
- Composite biomaterials based on ceramic polymers. I. Reinforced systems based on Al2O3/PMMA/PLLAJournal of Biomedical Materials Research, 1996
- Hydroxyapatite‐Reinforced Polyethylene as an Analogous Material for Bone ReplacementaAnnals of the New York Academy of Sciences, 1988
- Phase Equilibria in the System CaO‐Iron Oxide‐SiO2, in AirJournal of the American Ceramic Society, 1959