Mitigation of Gap Losses in Nanocrystalline Tape-Wound Cores
- 6 August 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (5) , 4656-4664
Abstract
A split core technique is proposed to mitigate the gap losses in high frequency nanocrystalline cores, which enables significant size reductions in thermally limited designs. Finite element analysis is used to examine the gap loss dependency on core width, D, revealing a non-linear relationship of the form loss $\propto D^{\alpha}$ is approximately constant for frequencies of 10 kHz - 200 kHz over the range of core widths typically used in power electronics, but $\alpha$ increases with gap length. Splitting the core into a number of sub-cores can therefore provide significant reductions in gap loss, especially with larger gap lengths. The results from a 300 A (peak), 200 A (continuous) inductor show that with three sub-cores and a gap length of 4 mm, the gap losses are reduced by 50%, and the hot-spot temperature is reduced by 15.1 deg C. Using the technique it is estimated that the original inductor weight could be reduced by 40% with four split-cores, making a significant impact on converter power density.
Keywords
Funding Information
- Engineering and Physical Sciences Research Council
- National Centre for Power Electronics (EP/K034804/1)
This publication has 18 references indexed in Scilit:
- High-Frequency Gap Losses in Nanocrystalline CoresIEEE Transactions on Power Electronics, 2016
- Iron Loss Evaluation of Reactor Core With Air Gaps by Magnetic Field Analysis Under High-Frequency ExcitationIEEE Transactions on Magnetics, 2015
- Loss Reduction of Laminated Core Inductor used in On-board Charger for EVsIEEJ Journal of Industry Applications, 2015
- High Power Density DC-DC Converter with SiC MOSFETs for Electric Vehicles2014
- Revised Magnetics Performance Factors and Experimental Comparison of High-Flux Materials for High-Current DC–DC InductorsIEEE Transactions on Power Electronics, 2011
- Inductor winding loss owing to skin and proximity effects including harmonics in non-isolated pulse-width modulated dc–dc converters operating in continuous conduction modeIET Power Electronics, 2010
- Measurement and loss model of ferrites with non-sinusoidal waveforms2004
- Eddy current losses and inductance of gapped foil inductors2003
- High performance cut cores prepared from crystallized Fe-based amorphous ribbonIEEE Transactions on Magnetics, 1990
- Influence of core gap in design of current-limiting transformersIEEE Transactions on Magnetics, 1973