Triaxial Failure Behavior of Highly Porous Cementitious Foams Used as Heat Insulation
Open Access
Abstract
This work reports a detailed experimental study that is aimed at investigating the failure mechanisms of highly porous cementitious foams used as heat insulation under triaxial stress states. The designed target dry density of the considered foam mixture was 180 kg/m3 by setting the water-to-cement ratio of the considered cement paste to 0.4. The mechanical experiments were accompanied by thermal tests to observe the effect that specific air void structures have on the resulting insulation properties and by micro-to-meso geometric studies to identify and classify the inner structure of the considered mineralized foams. Unconfined compressive strengths were performed first, obtaining peak stresses of 0.252, 0.283, 0.223, and 0.251 (results in MPa), corresponding to peak strains of 39.0, 28.6, 45.3, and 20.6 (in ×10−3 mm/mm), respectively. Moreover, three triaxial confinement levels of 33%, 66%, and 90% of the mean uniaxial compressive strength (fc) were adopted. The results showed that a 33% confinement may cause a strength increase and an almost perfect elastic–plastic stress–strain behavior. However, higher levels of confinements (i.e., 66% and 90%) produced very unstable behaviors in terms of the final strength and stress–strain response.Keywords
This publication has 32 references indexed in Scilit:
- A critical comparison of several numerical methods for computing effective properties of highly heterogeneous materialsAdvances in Engineering Software, 2013
- Fly Ash-based Geopolymer Lightweight Concrete Using Foaming AgentInternational Journal of Molecular Sciences, 2012
- New production process for insulation blocks composed of EPS and lightweight concrete containing pumice aggregateMaterials and Structures, 2012
- Transient thermal behaviour of crumb rubber-modified concrete and implications for thermal response and energy efficiency in buildingsApplied Thermal Engineering, 2012
- Fireproof Performance of Foam Concrete Insulation BoardAdvanced Materials Research, 2011
- Meeting the Insulation Requirements of the Building Envelope with Polyurethane and Polyisocyanurate FoamJournal of Cellular Plastics, 2005
- Measurement of thermal conductivity, thermal diffusivity and heat capacity of highly porous building materials using transient plane source techniqueInternational Communications in Heat and Mass Transfer, 2001
- An assessment of expressions for the apparent thermal conductivity of cellular materialsJournal of Materials Science, 1994
- Structural lightweight aggregate concrete with reduced density— lightweight aggregate foamed concreteInternational Journal of Cement Composites and Lightweight Concrete, 1980
- Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systemsJournal of Colloid Science, 1965