Deformation Behavior of Internal Porosity in Continuous Casting Wide-Thick Slab during Heavy Reduction
Open Access
Abstract
Heavy reduction (HR) is a novel technology that could effectively improve the internal porosities and other internal quality problems in continuously cast steel, during which a large reduction deformation is implemented at and after the strand solidification end. In the present paper, non-uniform solidification of the wide-thick slab was calculated with a two-dimensional (2D) heat transfer model. Based on the predicted temperature distribution at the solidification end of the casting strand, a three-dimensional (3D) thermal-mechanical coupled model was developed for investigating the deformation behavior of the internal porosities in wide-thick slab during HR. An Arrhenius-type constitutive model for the studied steel grade was derived based on the measured true stress-strain with single-pass thermosimulation compression experiments and applied to the 3D thermal-mechanical coupled model for improving the calculation accuracy. With the developed 3D thermal-mechanical coupled model, deformation behavior of the two artificial porosities located at the slab center of 1/2 width and 1/8 width during HR was investigated under different condition of HR deformation, HR start position, and HR reduction mode. Based on the calculated porosity closure degree (ηs) and the corresponding equivalent strain (εeq) under different HR conditions, a prediction model that describes the quantitative relationship between ηs and εeq was derived for directly and accurately evaluating the process effect of HR on improving the internal porosities in wide-thick slab.Keywords
Funding Information
- National Natural Science Foundation of China (51474058, U1708259)
- Program for Liaoning Excellent Talents in University (LJQ2015036)
- Fundamental Research Funds for the Central Universities (N172504024)
This publication has 34 references indexed in Scilit:
- Void Closure in a Large Cross Section Bars Hot Rolled from a Low Alloy Steel Ingot CastingTransactions of the Indian Institute of Metals, 2016
- Analysis of the evolution behavior of voids during the hot rolling process of medium platesJournal of Materials Processing Technology, 2015
- Numerical simulation and experimental verification of void evolution inside large forgings during hot workingInternational Journal of Plasticity, 2013
- Prediction of void closure in steel slabs by finite element analysisMetals and Materials International, 2013
- Finite-Element Analysis of Cylindrical-Void Closure by Flat-Die ForgingISIJ International, 2013
- Internal void closure during the forging of large cast ingots using a simulation approachJournal of Materials Processing Technology, 2011
- Development of forging process design to close internal voidsJournal of Materials Processing Technology, 2010
- Application of hydrostatic integration parameter for free-forging and rollingJournal of Materials Processing Technology, 2006
- A study of hole closure in hot rolling as influenced by forced coolingJournal of Materials Processing Technology, 1992
- Analysis of void closure in open-die forgingInternational Journal of Machine Tools and Manufacture, 1990