Identification and Quantification of Cell Gas Evolution in Rigid Polyurethane Foams by Novel GCMS Methodology
Open Access
Abstract
This paper presents a new methodology based on gas chromatography-mass spectrometry (GCMS) in order to separate and quantify the gases presented inside the cells of rigid polyurethane (RPU) foams. To demonstrate this novel methodology, the gas composition along more than three years of aging is herein determined for two samples: a reference foam and foam with 1.5 wt% of talc. The GCMS method was applied, on one hand, for the accurate determination of C5H10 and CO2 cell gases used as blowing agents and, on the other hand, for N2 and O2 air gases that diffuse rapidly from the surrounding environment into foam cells. GCMS results showed that CO2 leaves foam after 2.5 month (from 21% to 0.03% for reference foam and from 17% to 0.03% for foam with 1.5% talc). C5H10 deviates during 3.5 months (from 28% up to 39% for reference foam and from 29% up to 36% for foam with talc), then it starts to leave the foam and after 3.5 year its content is 13% for reference and 10% for foam with talc. Air diffuses inside the cells faster for one year (from 51% up to 79% for reference and from 54% up to 81% for foam with talc) and then more slowly for 3.5 years (reaching 86% for reference and 90% for foam with talc). Thus, the fast and simple presented methodology provides valuable information to understand the long-term thermal conductivity of the RPU foams.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (850697)
- MINECO, FEDER, UE (MAT2015-69234-R and RTC-2016-5285-5)
- Junta de Castile and Leon (VA275P18)
This publication has 14 references indexed in Scilit:
- Multi-objective optimization of heat transfer mechanisms of microcellular polymeric foams from thermal-insulation point of viewThermal Science and Engineering Progress, 2019
- Evaluation of the thermal conductivity and mechanical properties of water blown polyurethane rigid foams reinforced with carbon nanofibersEuropean Polymer Journal, 2018
- Analysis of thermal properties and heat transfer mechanisms for polyurethane foams blown with waterJournal of Thermal Analysis and Calorimetry, 2018
- Experimental study of the thermal conductivity of polyurethane foamsApplied Thermal Engineering, 2017
- Rigid polyurethane foams with infused nanoclays: Relationship between cellular structure and thermal conductivityEuropean Polymer Journal, 2016
- Reference Correlations of the Thermal Conductivity of Cyclopentane,iso-Pentane, andn-PentaneJournal of Physical and Chemical Reference Data, 2015
- Characterization of the cellular structure based on user-interactive image analysis proceduresJournal of Cellular Plastics, 2013
- Mechanism of extensional stress-induced cell formation in polymeric foaming processes with the presence of nucleating agentsThe Journal of Supercritical Fluids, 2012
- Thermal conductivity of polyurethane foams from room temperature to 20 KCryogenics, 1997
- Aging of polyurethane foamsInternational Journal of Heat and Mass Transfer, 1986