Mechanical Properties and Acoustic Emission Characteristics of Thawing Frozen Sandstone
Open Access
- 22 February 2022
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-11
Abstract
After the construction of a frozen shaft wall is completed, it undergoes a long thawing process. Damage accumulation under load may result in the rupture of the frozen wall and cause engineering accidents. The change in the mechanical properties of the frozen rock during the thawing process is crucial to the stability of the frozen wall. In this study, we selected Cretaceous saturated sandstone as the research object and performed uniaxial compression tests on the frozen sandstone to analyze its mechanical properties during the thawing process. In addition, acoustic emission technology was used to analyze the damage and failure characteristics of the rock. The main findings of the study are as follows: (1) the results of the uniaxial compression tests revealed that the thawing of frozen sandstone comprises five stages. The closure stress, crack initiation stress, expansion strength, and peak strength were obtained from the volumetric stress-strain curve. These four stress values act as the dividing points of the five stages. (2) The initiation stress of frozen sandstone at different temperatures accounts for approximately 50% of the peak strength. The strength value is low, the deformation is large, and it exhibits an obvious strain-softening phenomenon. (3) As the temperature increases, the closure level of the saturated sandstone gradually increases, and the crack initiation and expansion levels gradually decrease. (4) Based on the four characteristic stresses of the thawing process of frozen sandstone, the acoustic emission signal can be divided into a quiet period, an increasing period, a frequent period, a sharp increase period, and a decline period. (5) A frozen sandstone damage model was established based on the D-P failure criterion. The efficacy of the model was evaluated against the test data and was found to be reasonably accurate. This paper uses acoustic emission technology to simultaneously monitor the melting process of frozen rocks and reveal the relationship between intensity and temperature. The results provide theoretical and technical support for evaluating the mechanical damage induced by thawing of a frozen shaft wall.Keywords
Funding Information
- National Natural Science Foundation of China (51774231)
This publication has 28 references indexed in Scilit:
- Surface collapse control under thick unconsolidated layers by backfilling strip mining in coal minesInternational Journal of Rock Mechanics and Mining Sciences, 2019
- Acoustic emission investigation of hydraulic and mechanical characteristics of muddy sandstone experienced one freeze-thaw cycleCold Regions Science and Technology, 2018
- A physical and numerical investigation of sudden massive roof collapse during longwall coal retreat miningInternational Journal of Coal Geology, 2018
- Macro–meso freeze–thaw damage mechanism of soil–rock mixtures with different rock contentsInternational Journal of Pavement Engineering, 2018
- Freezing Strain Model for Estimating the Unfrozen Water Content of Saturated Rock under Low TemperatureInternational Journal of Geomechanics, 2018
- Effects of Freezing and Thawing Cycle on Mechanical Properties and Stability of Soft Rock SlopeAdvances in Materials Science and Engineering, 2017
- Degradation characteristics of shear strength of joints in three rock types due to cyclic freezing and thawingCold Regions Science and Technology, 2017
- Modeling the effect of freezing and thawing for sedimentary rocksEnvironmental Earth Sciences, 2016
- Experimental study on debonding of shotcrete with acoustic emission during freezing and thawing cycleCold Regions Science and Technology, 2015
- Effects of freeze–thaw on the determination and application of parameters of slope rock mass in cold regionsCold Regions Science and Technology, 2015