Microstrip patch based switched beam antenna at 2.45 GHz for wireless sensor network applications
- 5 July 2017
- journal article
- research article
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 31 (13) , 1333-1341
Abstract
The design and development of a switched beam antenna at 2.45 GHz industrial, scientific and medical band for wireless sensor network applications is presented in this paper. The antenna is capable of switching the beam pattern in directions such as in the boresight direction 0°, ±63° and as a bidirectional endfire radiator (±85°). The directive gain of the antenna is 3.9, 5.8 and 5.8 dBi in respect to those angles. The shift in the resonance frequency is found to be negligible irrespective of the direction of the switched beam. The realized gain of the proposed antenna in the steering direction is found to be better than a standard microstrip patch antenna on the same size of the substrate and ground plane. The antenna was designed and optimized through simulations using CST microwave studio and the prototype was experimentally tested using R&S ZVB8 network analyser.Keywords
Funding Information
- Enterprise Ireland (Technology gateway)
- University Grants Commission (UGCFRP)
This publication has 5 references indexed in Scilit:
- Pattern-Reconfigurable Microstrip Patch Antenna With Multidirectional Beam for WiMAX ApplicationIEEE Antennas and Wireless Propagation Letters, 2014
- Gain enhanced pattern reconfigurable planar Yagi‐Uda antenna on coplanar structureElectronics Letters, 2013
- Exploiting Low-Cost Directional Antennas in 2.4 GHz IEEE 802.15.4 Wireless Sensor Networks2007
- Wireless Sensor Networks2006
- A Pattern Reconfigurable Microstrip Parasitic ArrayIEEE Transactions on Antennas and Propagation, 2004