Performance and exergy analysis of a diesel engine run on petrodiesel and biodiesel blends containing mixed CeO2 and MoO3 nanocatalyst
- 29 July 2020
- journal article
- research article
- Published by Taylor & Francis in Biofuels
- Vol. 13 (1) , 1-7
Abstract
In this research, the second law of thermodynamics was employed to analyze the exergy of a diesel engine fueled with diesel–biodiesel blends (B5 and B10) and hybrid nanocatalyst additives at three concentrations (30, 60 and 90 ppm), containing cerium oxide and molybdenum oxide on amide-functionalized multiwall carbon nano tubes (MWCNTs). The research engine was a single-cylinder, four-stroke, direct-injection, air-cooled diesel engine. The exergy analysis was performed under full load conditions, at four engine speeds (1700, 2100, 2500 and 2900 rpm). The results revealed that by increasing the amount of nanocatalysts (CeO2-MWCNTs and MoO3-MWCNTs) in the fuel blends, the net exergy work rate of the diesel engine increased for both fuel blends (B5 and B10). The maximum net exergy work rate of the diesel engine was 7.71 (25.33% of total fuel exergy rate) for the B10 + 90ppm fuel blends at 2500 rpm. The exergy efficiency of the diesel engine ranged from 17.97% to 31% for B5 and 18.3% to 31.7% for B10 fuel blends, respectively. B10 containing 90 ppm nanocatalyst showed the highest exergy efficiency, at an engine speed of 1700 rpm. All fuel blends containing nanocatalyst emitted less carbon monoxide, hydrocarbon and NOx compared with nanocatalyst-free fuel blends.Keywords
This publication has 28 references indexed in Scilit:
- A comprehensive review on the environmental impacts of diesel/biodiesel additivesEnergy Conversion and Management, 2018
- Exergy-based optimization of a continuous reactor applied to produce value-added chemicals from glycerol through esterification with acetic acidEnergy, 2018
- The use of ELM-WT (extreme learning machine with wavelet transform algorithm) to predict exergetic performance of a DI diesel engine running on diesel/biodiesel blends containing polymer wasteEnergy, 2016
- Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: Combustion, engine performance and emissionsRenewable Energy, 2015
- Photoelectrochemical cells based on photosynthetic systems: a reviewBiofuel Research Journal, 2015
- Kinetic comparison of two basic heterogenous catalysts obtained from sustainable resources for transesterification of waste cooking oilBiofuel Research Journal, 2015
- Effect of Cerium Oxide Nanoparticles and Carbon Nanotubes as fuel-borne additives in Diesterol blends on the performance, combustion and emission characteristics of a variable compression ratio engineFuel, 2014
- Experimental investigation of the tractor engine performance using diesohol fuelApplied Energy, 2014
- Cetane number effect on the energetic and exergetic efficiency of a diesel engine fuelled with biodieselFuel Processing Technology, 2011
- Effect of biodiesel on engine performances and emissionsRenewable and Sustainable Energy Reviews, 2011