Abstract
A dual-mode power amplifier (PA) with controllable output states is presented. Leveraging the advantages of the outphasing architecture, the proposed PA can achieve high efficiency at two different power modes (saturation and backed-off). To solve the bandwidth limitation problem caused by the 1/4 and 1/2 wavelength transmission lines in traditional outphasing amplifiers, ±ϕ equivalent transmission line with low phase dispersion effect is employed. The low phase dispersion characteristic of this ±ϕ equivalent transmission line is the core mechanism for bandwidth extension, which significantly reduces phase variation across the frequency band compared to traditional λ/4/λ/2 lines. Moreover, to reduce the mode switching complexity and ensure efficiency, a digitally controlled phase shifter is introduced into the signal conditioning circuit of a conventional outphasing PA. This DCPS-based single-input control scheme replaces the complex dual-input phase synchronization module of traditional outphasing PAs, simplifying system integration while enabling flexible dual-mode switching. In virtue of this design strategy, the output states of the amplifier can be artificially controlled with different back-off range. For demonstration, a 4.8 GHz monolithic microwave integrated circuit (MMIC) prototype is designed using a 0.25 μm gallium arsenide (GaAs) process. Measurement results indicate that the prototype achieves a drain efficiency higher than 47% in saturated mode across the frequency range of 3.8-5.8 GHz. Additionally, a 6 dB back-off efficiency exceeding 26.5% is obtained within the frequency range of 4.2-5.8 GHz.
Funding Information
  • National Key R&D Program of China (2023YFB2904900)
  • Natural Science Foundation of Zhejiang Province (LD24F010001)
  • Natural Science Foundation of Zhejiang Province (LR25F010004)

This publication has 29 references indexed in Scilit: