Fabrication of Micro-Structured Polymer by Micro Injection Molding Based on Precise Micro-Ground Mold Core
Open Access
- 16 April 2019
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 10 (4) , 253
Abstract
Precise micro-grinding machining was proposed to fabricate regular and controllable micro-grooved array structures on the surface of mold cores to realize the mass production and manufacturing of micro-structured polymer components by micro injection molding in this paper. First, the 3D topographies and section profiles of micro-ground mold cores and micro-formed polymers with different micro-structure parameters were presented. Then, the surface roughness of mold cores and polymers were compared. Next, the relationships between machining accuracy of mold core ground by micro-grinding and filling rates of micro-structured polymer formed by micro injection molding were investigated. Finally, the influences of micro injection molding parameters on the filling rate of micro-structures polymer were investigated. It is shown that the micro-structured polymer can be effectively and rapidly fabricated using the proposed method. The experimental results indicate the highest form accuracy of the micro-grooved mold core and the filling rate of micro-structured polymer can reach to 4.05 µm and 99.30%, respectively. It is found that the filling rate of the micro-structured polymer roughly increased with increasing machining accuracy of the mold core. The injection pressure had the greatest influence on the filling rate of the injection formed polymer, while the melt temperature had the least influence.Keywords
Funding Information
- National Natural Science Foundation of China (51805334, 51575360, 51675347)
- Fundamental Research Funds for the Shenzhen University (2018031)
- Science and Technology Planning Project of Guangdong Province (2016A040403043, 2017A010102003)
This publication has 21 references indexed in Scilit:
- Wetting behaviour of laser textured Ti3SiC2 surface with micro-grooved structuresMaterials Science and Technology, 2016
- Analysis of the influence of part thickness on the replication of micro-structured surfaces by injection moldingMaterials & Design, 2016
- Influence of chromium on microstructure and etching behaviour of new Ni–Fe–Al based alloyMaterials Science and Technology, 2015
- Study on micro-topographical removals of diamond grain and metal bond in dry electro-contact discharge dressing of coarse diamond grinding wheelInternational Journal of Machine Tools and Manufacture, 2015
- Investigating the technological limits of micro-injection molding in replicating high aspect ratio micro-structured surfacesCIRP Annals, 2014
- Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved toolInternational Journal of Machine Tools and Manufacture, 2013
- Replication capability of micro injection moulding process for polymeric parts manufacturingThe International Journal of Advanced Manufacturing Technology, 2012
- Dry electro-contact discharge mutual-wear truing of micro diamond wheel V-tip for precision micro-grindingInternational Journal of Machine Tools and Manufacture, 2012
- Design and manufacture of microporous polymeric materials with hierarchal complex structure for biomedical applicationMaterials Science and Technology, 2008
- Microinjection molding of thermoplastic polymers: a reviewJournal of Micromechanics and Microengineering, 2007