Effect of UV-C Radiation on 3D Printed ABS-PC Polymers
Open Access
Abstract
During the initial stages of the COVID-19 pandemic, healthcare facilities experienced severe shortages of personal protective equipment (PPE) and other medical supplies. Employing 3D printing to rapidly fabricate functional parts and equipment was one of the emergency solutions used to tackle these shortages. Using ultraviolet light in the UV-C band (wavelengths of 200 nm to 280 nm) might prove useful in sterilizing 3D printed parts, enabling their reusability. Most polymers, however, degrade under UV-C radiation, so it becomes necessary to determine what 3D printing materials can withstand the conditions found during medical equipment sterilization with UV-C. This paper analyzes the effect of accelerated aging through prolonged exposure to UV-C on the mechanical properties of parts 3D printed from a polycarbonate and acrylonitrile butadiene styrene polymer (ABS-PC). Samples 3D printed using a material extrusion process (MEX) went through a 24-h UV-C exposure aging cycle and then were tested versus a control group for changes in tensile strength, compressive strength and some selected material creep characteristics. Testing showed minimal mechanical property degradation following the irradiation procedure, with tensile strength being statistically the same for irradiated parts as those in the control group. Irradiated parts showed small losses in stiffness (5.2%) and compressive strength (6.5%). Scanning electron microscopy (SEM) was employed in order to assess if any changes occurred in the material structure.Keywords
This publication has 71 references indexed in Scilit:
- Photodegradation and photostabilization of polymers, especially polystyrene: reviewSpringerPlus, 2013
- Color changes due to thermal ageing and artificial weathering of pigmented and textured ABSPolymer Engineering & Science, 2012
- Influence of different types of UV absorber/UV stabilizer combination on the photodegradation of PC/ABS blendJournal of Applied Polymer Science, 2011
- Effect of Reprocessing and Accelerated Weathering on ABS PropertiesJournal of Polymers and the Environment, 2009
- Degradation of acrylonitrile-butadiene-styrene and polycarbonate by UV irradiationPolymer Degradation and Stability, 2000
- Fracture characterization of PC/ABS blends: effect of reactive compatibilization, ABS type and rubber concentrationPolymer, 1999
- Recent advances in bisphenol-A polycarbonate photodegradationPolymer Degradation and Stability, 1995
- Polycarbonate/ABS blends: Processability, thermal properties, and mechanical and impact behaviorAdvances in Polymer Technology, 1994
- Wavelength sensitivity of the photoinduced reaction in polycarbonateJournal of Polymer Science Part A: Polymer Chemistry, 1993
- Mechanical properties of ABS/polycarbonate blendsJournal of Applied Polymer Science, 1984