Influence of High Temperature on the Fracture Properties of Polyolefin Fibre Reinforced Concrete
Open Access
Abstract
Concrete has become the most common construction material, showing, among other advantages, good behaviour when subjected to high temperatures. Nevertheless, concrete is usually reinforced with elements of other materials such as steel in the form of rebars or fibres. Thus, the behaviour under high temperatures of these other materials can be critical for structural elements. In addition, concrete spalling occurs when concrete is subjected to high temperature due to internal pressures. Micro polypropylene fibres (PP) have shown to be effective for reducing such spalling, although this type of fibres barely improves any of the mechanical properties of the element. Hence, a combination of PP with steel rebars or fibres can be effective for the structural design of elements exposed to high temperatures. New polyolefin fibres (PF) have become an alternative to steel fibres. PF meet the requirements of the standards to consider the contributions of the fibres in the structural design. However, there is a lack of evidence about the behaviour of PF and elements made of polyolefin fibre reinforced concrete (PFRC) subjected to high temperatures. Given that these polymer fibres would be melt above 250 °C, the behaviour in the intermediate temperatures was assessed in this study. Uni-axial tests on individual fibres and three-point bending tests of PFRC specimens were performed. The results have shown that the residual load-bearing capacity of the material is gradually lost up to 200 °C, though the PFRC showed structural performance up to 185 °C.Keywords
This publication has 22 references indexed in Scilit:
- Benefits of synthetic fibers on the residual mechanical performance of UHPFRC after exposure to ISO standard fireCement and Concrete Composites, 2019
- Assessment of the shear behaviour of polyolefin fibre reinforced concrete and verification by means of digital image correlationConstruction and Building Materials, 2018
- Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposureConstruction and Building Materials, 2018
- Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concreteConstruction and Building Materials, 2018
- Structural Cast-in-Place Application of Polyolefin Fiber–Reinforced Concrete in a Water Pipeline Supporting ElementsJournal of Pipeline Systems Engineering and Practice, 2017
- Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: Spalling, transfer and mechanical propertiesConstruction and Building Materials, 2017
- On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concreteConstruction and Building Materials, 2014
- Application of constitutive models in European codes to RC–FRCConstruction and Building Materials, 2013
- On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement pasteCement and Concrete Research, 2008
- Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperaturesCement and Concrete Research, 2004